there has been alot of talk about flappers on the site
so i thought id post up the process of putting them on
yourself here is how i put mine on
first take wheel off the car and let all the air out of the
tyre

then once all the air is out of the tyre push around the edge
of the tyre near the rim this will brake the bead (seal) of the tyre

then get the flapper and sit it on the tyre and push the inner edge
of the flapper into the bead or seal you have just broken


it should go in fairly easy once you get started
do this all the way around the rim

once its in fill the tyre up with air slowly checking that the flapper
is even all the way around

and there you go you just saved yourself about $20 to $25 Because
this is what they charge at a tyre shop just to fit them up
ek jay
