4 Speed Auto Advice Behind 202

bonnie · Post by **bonnie** » Fri Jan 14, 2011 8:09 pm

Hi i am at my wits end hear, I would like to fit 4 speed auto into EK,( which allready has hydromatic box) will it fit in tunnel and any other advice most welcome cheers

Mick · Post by **Mick** » Fri Jan 14, 2011 8:24 pm

it should fit in the tunnel 99.99% sure, then you'll need the adapter stuff and and a fabricated crossmember and a modified tailshaft

Trev · Post by **Trev** » Fri Jan 14, 2011 9:03 pm

Check out the Castlemaine rod shop web site, they have kits (as Mick said).

minifb · Post by **minifb** » Sat Jan 15, 2011 10:14 am

I only had trouble with it just touching the firewall And since i couldnt weld i ended up taking it out.. But am keen to do it again if i can get someone to weld for me..

Thommo · Post by **Thommo** » Mon Jan 17, 2011 5:01 pm

Gday Bonny
Are you talking a Turbo 700 conversion?

if so, see here - http://www.fbekholden.com/forum/viewtop ... 26&t=10988

FATBOY · Post by **FATBOY** » Mon Jan 17, 2011 7:24 pm

just finished doing this conversion in my fc wagon.Just got to get it to the exhaust shop to get the exhaust pipe tweaked .Drives fine just got to work out what ratio diff is in the rear end(hr) ive got a 3.55lsd to install Where thinking it might have 3.08or 2.78 as its a bit sluggish of the mark.The car needs a good run
regards fatboy

(AUST)Mod · Post by **(AUST)Mod** » Mon Jan 17, 2011 7:52 pm

FATBOY wrote:just finished doing this conversion in my fc wagon.Just got to get it to the exhaust shop to get the exhaust pipe tweaked .Drives fine just got to work out what ratio diff is in the rear end(hr) ive got a 3.55lsd to install Where thinking it might have 3.08or 2.78 as its a bit sluggish of the mark.The car needs a good run
regards fatboy

Pics and more info please

Trev · Post by **Trev** » Mon Jan 17, 2011 9:05 pm

(AUST)Mod wrote:
FATBOY wrote:just finished doing this conversion in my fc wagon.Just got to get it to the exhaust shop to get the exhaust pipe tweaked .Drives fine just got to work out what ratio diff is in the rear end(hr) ive got a 3.55lsd to install Where thinking it might have 3.08or 2.78 as its a bit sluggish of the mark.The car needs a good run
regards fatboy
Pics and more info please

Thommo wrote:Gday Bonny
Are you talking a Turbo 700 conversion?

if so, see here - http://www.fbekholden.com/forum/viewtop ... 26&t=10988

FATBOY · Post by **FATBOY** » Mon Jan 17, 2011 9:33 pm

Will take some pics when its at the exhaust shop tomorrow
regards fatboy

bonnie · Post by **bonnie** » Wed Jan 19, 2011 1:18 pm

Thanks Harko , Those fact sheets,are valuable thanks heaps.

bonnie · Post by **bonnie** » Wed Jan 19, 2011 1:19 pm

Fatboy, hope to see your pics soon cheers

fbekholden.com

4 Speed Auto Advice Behind 202

4 Speed Auto Advice Behind 202

Re: 4 Speed Auto Advice Behind 202

Re: 4 Speed Auto Advice Behind 202

Re: 4 Speed Auto Advice Behind 202

Re: 4 Speed Auto Advice Behind 202

Re: 4 Speed Auto Advice Behind 202

Re: 4 Speed Auto Advice Behind 202

Re: 4 Speed Auto Advice Behind 202

Re: 4 Speed Auto Advice Behind 202

Re: 4 Speed Auto Advice Behind 202

Re: 4 Speed Auto Advice Behind 202