Page 1 of 1
vk 202 extractors . carby
Posted: Wed Aug 26, 2009 7:03 pm
by ekdave1962
hi im chasing a set of extractors to suit a vk 202 .. need to suit carby motor ..ooh in vic please
Posted: Sat Aug 29, 2009 11:46 pm
by Brodie
Hey Dave,
Got a set of VK stainless extractors, they are the 6 into 3 into 1 type.
But are in Perth and they're most likely injected ones, not sure
How do ya tell if they are to suit carby of not?
Cheers,
Brodie
Posted: Sun Aug 30, 2009 12:21 am
by vintageholden
how much and where are you
Posted: Sun Aug 30, 2009 8:24 am
by ekdave1962
hi there .. thanks i found a set
but the carby ones hug the bloclk so the carby manifold can fit,
injected ones come out of the flange as 90 deg for a bout 80 mm then curve down.
Posted: Sun Aug 30, 2009 1:18 pm
by Brodie
righto, these are injected ones..
vintageholden, $100 or swap for blue/black extractors to suit carb motor.
am in huntingdale