vk 202 extractors . carby

ekdave1962 · Post by **ekdave1962** » Wed Aug 26, 2009 7:03 pm

hi im chasing a set of extractors to suit a vk 202 .. need to suit carby motor ..ooh in vic please

Brodie · Post by **Brodie** » Sat Aug 29, 2009 11:46 pm

Hey Dave,

Got a set of VK stainless extractors, they are the 6 into 3 into 1 type.
But are in Perth and they're most likely injected ones, not sure

How do ya tell if they are to suit carby of not?

Cheers,
Brodie

vintageholden · Post by **vintageholden** » Sun Aug 30, 2009 12:21 am

how much and where are you

ekdave1962 · Post by **ekdave1962** » Sun Aug 30, 2009 8:24 am

hi there .. thanks i found a set
but the carby ones hug the bloclk so the carby manifold can fit,
injected ones come out of the flange as 90 deg for a bout 80 mm then curve down.

Brodie · Post by **Brodie** » Sun Aug 30, 2009 1:18 pm

righto, these are injected ones..

vintageholden, $100 or swap for blue/black extractors to suit carb motor.
am in huntingdale