Post photos of your pride and joy, or updates on your rebuild!
Moderators: reidy , Blacky
60FB
Posts: 10 Joined: Sun Jan 15, 2006 8:16 pm
State: NOT ENTERED
Location: sydney
Post
by 60FB » Wed Jan 18, 2006 12:26 am
Hi all I picked up my FB the same day as row1, 14th Jan 06 It was a un-finished resto
Its been resrayed in its orginal colour (average job) and the front end rebuilt I got alot of parts aswell mainly EK parts.
I will post some more later
row1
Posts: 127 Joined: Mon Jan 16, 2006 12:26 am
State: NOT ENTERED
Location: Queensland(SE)
Post
by row1 » Wed Jan 18, 2006 6:44 pm
Hey Mate,
I would say that I'd race you to get mine finished before yours....
lol
but you've already got a huge head start lol
nah looks like a beaut, keep us updated, and post alot of pics.
Cheers
-- Rowan
[img]http://i48.photobucket.com/albums/f208/row1/sign.jpg[/img]
60FB
Posts: 10 Joined: Sun Jan 15, 2006 8:16 pm
State: NOT ENTERED
Location: sydney
Post
by 60FB » Wed Jan 18, 2006 9:25 pm
Hi Rowan,
mate knowing me you will be cruzin in yours way before I
I will keep everybody posted on mine but make sure you do the same.... : I need as much help as I can get.
Cheers Nick
FB 60
Posts: 84 Joined: Tue Aug 30, 2005 3:12 pm
State: NOT ENTERED
Location: Coolamon
Post
by FB 60 » Wed Jan 18, 2006 10:20 pm
Hi Nick
You're at the right place for help with your project - just ask.
Good luck with it.
Andrew
[b][color=#EEAD0E]Andrew....AKA FC_1958 on the "other" forum[/color][/b]
parisian62
Posts: 3997 Joined: Wed May 11, 2005 2:19 pm
State: NSW
Location: Sydney
Contact:
Post
by parisian62 » Thu Jan 19, 2006 2:05 pm
Nick,
another FB saved - good stuff. Glad to see you on the forum.
Regards
Stewart
60FB
Posts: 10 Joined: Sun Jan 15, 2006 8:16 pm
State: NOT ENTERED
Location: sydney
Post
by 60FB » Sat Jan 21, 2006 10:37 pm
Hi all,
Does anybody know what badge goes in these 4 holes? The holes are above the fuel cap but below the key hole. I'am fairly sure this is a EK boot, doesn't the FB badge go above the keyhole?
Cheers Nick[img][img]
http://i42.photobucket.com/albums/e327/60FB/fb045.jpg [/img][/img]
FB 60
Posts: 84 Joined: Tue Aug 30, 2005 3:12 pm
State: NOT ENTERED
Location: Coolamon
Post
by FB 60 » Sun Jan 22, 2006 12:12 am
Nick
You are right - the holden badge goes above the key.
Looks like something non standard was fitted.
Also might have been 2 badges - the last hole seems higher.
Andrew
[b][color=#EEAD0E]Andrew....AKA FC_1958 on the "other" forum[/color][/b]
Blacky
Posts: 13341 Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills
Post
by Blacky » Sun Jan 22, 2006 12:42 am
That looks like it could be a bootlid off an FC Special.
They had a boot lock surround and a spear out from each side.
I started with nothing and still have most of it left.
Foundation member #61 of FB/EK Holden club of W.A.
FB 60
Posts: 84 Joined: Tue Aug 30, 2005 3:12 pm
State: NOT ENTERED
Location: Coolamon
Post
by FB 60 » Sun Jan 22, 2006 7:54 am
Spot on Blacky - had a look at my FC - 4 holes and the spear end holes are sightly higher then the centre holes
Andrew
[b][color=#EEAD0E]Andrew....AKA FC_1958 on the "other" forum[/color][/b]
60FB
Posts: 10 Joined: Sun Jan 15, 2006 8:16 pm
State: NOT ENTERED
Location: sydney
Post
by 60FB » Sun Jan 22, 2006 1:43 pm
Thanks for your help everybody
ipg
Post
by ipg » Fri Mar 17, 2006 8:49 pm
can anyone can tell me what colour this car is?
cheers
ipg