2 speed
Posted: Tue Mar 25, 2008 10:28 pm
Hi holden goers I need info for 2 speed wiper motor please I have an ek motor what do I need to do thanks heaps FB BAD
Page 1 of 2
Posted: Tue Mar 25, 2008 10:39 pm
Good qwestian. Me too?
Posted: Tue Mar 25, 2008 11:05 pm
Best thing to do is ring Hoppers Stoppers in Vic and ask for Ken. He does a service exchange 2 speed wiper motor deal , the last one I got was $80 including instructions,wiring and switch.
Steal of a deal.
Steal of a deal.
Posted: Tue Mar 25, 2008 11:09 pm
Will keep this in mind. Ta
thanks
Posted: Tue Mar 25, 2008 11:26 pm
cool 1 step closer to rego thanks heaps any thing cheaper ?
Posted: Tue Mar 25, 2008 11:28 pm
Cheaper than $80 for a new wiper motor and a new switch ? 
2 speed
Posted: Tue Mar 25, 2008 11:39 pm
IM working 4 a bank but they take all my money !!!!!!!
Posted: Wed Mar 26, 2008 1:48 pm
cheaper than $80 
i was gunna recomend someone that does a set up for $240 and i thought that was a good price 
i was gunna recomend someone that does a set up for $240 and i thought that was a good price Posted: Wed Mar 26, 2008 4:38 pm
If its just for rego, fit a 2 speed switch and hook in a resister, the standard wiper motor is quick enough anyway. Cost about $12.
Regards John
Regards John
Posted: Wed Mar 26, 2008 7:23 pm
Haha I had a big run in with an engineer over that one oldnek , They are like school teachers because if you challenge them ,be it right or wrong you will become the looser 
I told him that EK tecvhnically should pass because the rego authorities want to cover 55 beats per minute and EKs are faster already .
So putting in the resistor and slowing it down for first gear is perfect.
If I just presented it there would have been no problem
I told him that EK tecvhnically should pass because the rego authorities want to cover 55 beats per minute and EKs are faster already .
So putting in the resistor and slowing it down for first gear is perfect.
If I just presented it there would have been no problem
Posted: Wed Mar 26, 2008 7:38 pm
also i think the resistor thing only works with the preslite type motors, as we tried it on the van with the other type of motor and it wouldn't work
Posted: Wed Mar 26, 2008 8:06 pm
Blacky,
With the service exchange do you have to send him a working wiper motor first?
And do you have to send a 2 speed motor? or can i send any ek wiper motor?
Sorry to be a pain but was about to spend my money elsewhere, but 80 clams is a bargin 
...
With the service exchange do you have to send him a working wiper motor first?
And do you have to send a 2 speed motor? or can i send any ek wiper motor?
Sorry to be a pain but was about to spend my money elsewhere, but 80 clams is a bargin
...Posted: Wed Mar 26, 2008 8:43 pm
Just send a normal single speed one and you will get what you want, call him first, Trev 
.
.Posted: Wed Mar 26, 2008 11:52 pm
I used a Subaru Wiper motor in mine. ( the only reason for fitting it was it came with a half cut we had at the shop) but Big mistake, the high speed goes that fast it makes the wipers hit the stainless surround and beyond, poor little old linkages can't handle the fast pace. I had to use a dropping resister to slow down the high speed only.
2 speed
Posted: Thu Mar 27, 2008 12:14 am
I called hopper stopper and ken has moved on They gave me his no But u need a preslite motor and a hk ht hg switch and he is out of them has any one got them ? thanks heaps FBbad