Stu's bonnet spring stretcher tool
Posted: Fri May 13, 2016 6:41 pm
Thought I'd put up a dedicated post on Stu's Spring Stretcher for those who haven't seen it. The original is here:
http://www.fbekholden.com/forum/viewtop ... et#p173991
I went to make one up this afternoon, and was about 2" too short in the length of threaded rod I had
. Using the licensed Stu Stretcher technology, I applied a little more grunt to the stetcher bit:
Worked a treat for getting the springs back onto my hinges. Those shiny springs in the photos above are the ones that FB0000 is selling here (nice product John
):
http://www.fbekholden.com/forum/viewtop ... =2&t=22188
Cheers,
Harv
http://www.fbekholden.com/forum/viewtop ... et#p173991
I went to make one up this afternoon, and was about 2" too short in the length of threaded rod I had
. Using the licensed Stu Stretcher technology, I applied a little more grunt to the stetcher bit:
Worked a treat for getting the springs back onto my hinges. Those shiny springs in the photos above are the ones that FB0000 is selling here (nice product John
):http://www.fbekholden.com/forum/viewtop ... =2&t=22188
Cheers,
Harv
New and improved Mark II with extra hydraulic lift by Harv 
I like it! 