Finned Alloy rocker cover

Kingaz · Post by **Kingaz** » Wed Apr 18, 2007 8:59 pm

Hey everyone i was wondering if you guys could post some pics of the different types of finned rocker covers WEY etc currently shopping around for one at the moment

Thommo · Post by **Thommo** » Wed Apr 18, 2007 9:36 pm

There's a great Chrome Steel Original Rocker Cover on E-Bay right now

(search 'Grey Motor')
Doesn't go dull, matches the side cover you could chrome!!!!!

I'm givin' It a plug because, I'm selling it

Here's an example of a SPECO unit

Trev · Post by **Trev** » Thu Apr 19, 2007 5:09 am

This one is a WEY it was on the engine I sold

Trev

Sammy · Post by **Sammy** » Thu Apr 19, 2007 3:17 pm

if your interested in one for a red/blue/black motor then this is the shit!!

they don't have the paint in the fins, but thats an easy addition.

this one is also an old model, the new models have 'HOLDEN' cast in the top.

Thommo · Post by **Thommo** » Thu Apr 19, 2007 4:52 pm

To my limited knowledge, this would be a very early Finned Rocker Cover,
because of the Dip in the fins where the longer flared throat of the breather would be.
This one has the short throat breather in it , which I'm assuming is from the later grey motors.
There is no name or markings on this one, I cant tell you who made it.

Feel free to correct me If I'm assuming wrong, anybody.

The Dip can be seen clearly in this pic, where the long throat breather cap swings in, when fitted.

There's the 'Deep Throat" breather, in the next picture below.

aussiebogan_no1 · Post by **aussiebogan_no1** » Thu Apr 19, 2007 4:58 pm

Mine doesnt have a neme either but here it is if you want to have a look??

Regards
Richard

Kingaz · Post by **Kingaz** » Thu Apr 19, 2007 8:53 pm

thanks for the response and for everyone who posted pics is there any difference in the amount of fins for certain brands may be a silly question but thought someone might know