Tinting Acrylic paint

Includes sheet metal, rubbers, bumpers, badges and rust repairs.

Moderators: reidy, Blacky

Post Reply
brad671
Posts: 13
Joined: Wed Oct 19, 2005 6:42 am
State: NOT ENTERED

Tinting Acrylic paint

Post by brad671 »

Can you tint acrylic paint by adding another colour acrylic to it E.G. if I want a very light blue can I add a blue acrylic to a white acrylic until i get the colour I'm looking for?
mrs ratbox

Post by mrs ratbox »

that's exactly how it's done, although it can be tricky go a little at a time, it's another job i used to do
brad671
Posts: 13
Joined: Wed Oct 19, 2005 6:42 am
State: NOT ENTERED

Post by brad671 »

Thanks Ratbox
Trev
Posts: 7897
Joined: Thu Apr 15, 2004 6:43 pm
State: NOT ENTERED
Location: Wonthaggi

Post by Trev »

Just keep in mind if you mix it yourself it's going to be harder to match it up again, better off getting the rite color in the first place (sorry to state the obvious :roll: ), Trev 8) .
[img]http://i47.photobucket.com/albums/f177/trevwood/WOOFTOsmall.jpg[/img]
Woofto Car Club Member No3
tm 50
Posts: 1130
Joined: Mon Aug 31, 2009 7:04 pm
State: NOT ENTERED
Location: Carrum Downs

Post by tm 50 »

Biggest problem you will have is if you are not using base tinters but a blue thathas been made up with tinters as Trev said next time it will be extremely difficult as the blue may have a touch more of yellow and some magenta etc, so the next time you get some blue if its a pre mixed color it may be stronger or weaker in tinters than the one you originaly used. i do this for work every day if is a one off job no big deal but if i hve to repeat the job in the future i always order it to the formula used
brad671
Posts: 13
Joined: Wed Oct 19, 2005 6:42 am
State: NOT ENTERED

Post by brad671 »

Its a one off (hopefully anyway) so I just want to get a colour that is close to the orignal but different if you get my drift.
mrs ratbox

Post by mrs ratbox »

if yor using a dark blue like i said use only a very little at a time, when paints are mixed you'de be amazed how much of basically a drop of a certain tinter goes in a 4 litre mix
Post Reply