My bagged EK - Final trim fitted......

mattymartin · Post by **mattymartin** » Mon Sep 15, 2008 4:59 am

hey, ekkoo1,

mate its not looking good...

where do all those other guys with bags get there cars engineered... get on to a forum were there are other bagged cars see what they say, (maybe a minitruck site?)

anymore progress on the beast & or bike...

matty martin

DNA · Post by **DNA** » Mon Sep 15, 2008 8:13 am

I think most people who have there FB/EKs bagged most likely dont have it engineer approved.

Theres a matt black EK that has 'em and Im sure there not engineered!

mrs ratbox · Post by **mrs ratbox** » Mon Sep 15, 2008 12:10 pm

it sucks cause there's alot of wakers but try downundertruckin.com (funny that's how i had previous knowledge of bexderity

) there's a forum, and i can't beleive some of the shit they seem to get engineered, a guy that did bexdertity's car advertises on there and she reckons it is legal

alot of newcastle people on there and they all seem to chase an engineer called i think vtol

Miss Piggy · Post by **Miss Piggy** » Mon Sep 15, 2008 12:14 pm

I'd say only around 25% of Minitrucks air suspension is engineered. Maybe.

Try some local guys like Ziggy's Hotrods or Kyle's Conversions and see who they use. There's been some pretty wild cars come out of both workshops with full rego.

FB MAD · Post by **FB MAD** » Mon Sep 15, 2008 7:26 pm

PM sent re engineers EK001.

Shop around for engineers till you can find one with some commonsense.

There is one in your area that is senile ( details in PM ) so avoid him unless you enjoy talking to idiots

Good luck and let us know how you go.

EKK001 · Post by **EKK001** » Mon Sep 15, 2008 11:03 pm

Haha...
Funny, that senile one you mentioned in PM was the exact one i called....
Cheers for the advice guys, i am re-inspired to call a few more again...
Not too much progress on beast lately... Picked up all the new glass a few weeks ago and its booked in for the interior in around a months time...
Am going to move the filler back out of the boot to the original location although i have a very trick filler unit...
As for bike, it was off the road for a while.. the nitrous blew a seal in the crankcase so had to order a new seal and stuff around with it for a while... all going sweet now though, put a few miles on it over the glorious weekend..
Have a couple of weeks holidays as of next wednesday so will hopefully get a bit done then...
Hey matty, your wagon is looking smooth and creamy......

FCCOOL · Post by **FCCOOL** » Mon Sep 22, 2008 9:27 pm

hey paul, when i got my car engineered up there 11 years ago it was just the same, as soon as i mentoned that i cut the tunnel to fit another gearbox they were not interested, some of these guys dont deal with old holdens or even cars very often, probably half off 48 to ej holdens have had the tunnel cut and modified somewere, just wondering, did the place that did your bags and tunnel know the car was going through a engineer, do they know a engineer, they might have one they are getting cars done through that has experience with these.
my car was a basic common conversion, HR front end, all synchro, HR rear and a red motor, i made about 6 calls till i found one who knew what he was talking about, he straight way rattled of the requirements i was fimiliar with like electric wipers, seatbelts and demister, the rest kinda freaked out about the modifications.
If you remember the heagneys that i used to hang out with, who all had hydrulics, they had to reinforce the large holes cut, seal around any hoses going through the body and the switch had to be wired in a way that they could only function when the car was parked to be legally approved.

EKK001 · Post by **EKK001** » Mon Sep 22, 2008 11:29 pm

Hey mate,
At the time i did the bags i was going to try and get away with not engineering it.. i just kind of told him i wanted it as low as possible... he did exactly that.. i was happy...
Am gonna try that Kevin Humphries guy and see what he says..
I have a couple of weeks off work now so am hopefully gonna get it sorted...
Yeah i remember the heagneys, he was driving an ej wagon last time i saw him.. that LTD was a pretty cool car back in its day hey...

matches · Post by **matches** » Tue Sep 23, 2008 9:40 am

EKKOOL: if you'd be willing to drive up to port macquarie i'll ak the engineer i'm going through what he reckons has to be done to pass it. he's very logically minded (means if it works properly he'll pass it) not too technical. pluss its a nice drive up here

Luke.

EK283 · Post by **EK283** » Tue Sep 23, 2008 10:45 am

Guys,

Just remember drive a car not engineered and you will have no insurance when things go wrong!

Have a crash and cause any damage and you will pay for it.

Have a crash and kill someone then look out. I dont understand why anyone would take the risk ( I certainly wouldn't ).

Keep searching and hopefully someone will do it right then you can have peace of mind. You know cruising is no fun when your knuckles are always white!

Regards Greg

EKK001 · Post by **EKK001** » Tue Sep 23, 2008 2:19 pm

Hey Matches,
A drive up to Port Macquarie is definitely not out of the question... its not too far from me really... if you could see what he reckons that would be much appreciated... im still going to hunt around in Newcastle and see who i can come up with..
Cheers mate..

FCCOOL · Post by **FCCOOL** » Tue Sep 23, 2008 9:36 pm

EKK001 wrote:Hey mate,
At the time i did the bags i was going to try and get away with not engineering it.. i just kind of told him i wanted it as low as possible... he did exactly that.. i was happy...
Am gonna try that Kevin Humphries guy and see what he says..
I have a couple of weeks off work now so am hopefully gonna get it sorted...
Yeah i remember the heagneys, he was driving an ej wagon last time i saw him.. that LTD was a pretty cool car back in its day hey...

he was trying to sell the ltd for $20000 back then, recently with a new owner it went up for grabs, i nearly bought it on ebay, my max bid $1200, i got out bid in the last 20 seconds.
they recently sold they holden wagon, he is now waiting for a 50 merc wich is sitting on a ship coming in now. jasons older brother is rebuilding his hearse and getting around in his wifes trans am, the old man is running around in a jag xjs wich he fitted a twin turbo supra motor into, gee, parents these days

oldnek · Post by **oldnek** » Wed Sep 24, 2008 1:14 pm

EK283 wrote:Guys,

Just remember drive a car not engineered and you will have no insurance when things go wrong!

Have a crash and cause any damage and you will pay for it.

Have a crash and kill someone then look out.

I'm totally with you on this one Greg.

matches · Post by **matches** » Wed Sep 24, 2008 1:28 pm

i rang my engineer today for you and he asked if they were fitted with input from an engineer or not? if not take some photo's and drawings of how it was done and he can let you know if it's been done in the right way and anything you need to do for rego, but he said there is a fair bit of leeway on doing this to an ek so i'd say he'll pass it. seeing as though your car has been done to such a respectable standard he wouldn't think you'd shortcut anything.
i'll pm you my number so we can chat further on this.
hope it helps,
Luke

RAT138 · Post by **RAT138** » Wed Oct 08, 2008 5:30 pm

any updates on this car?