School me: a hoist at home
Re: School me: a hoist at home
I know that engine cranes take up a bit of space but they are really handy.
Sent from my SM-G781B using Tapatalk
Sent from my SM-G781B using Tapatalk
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: School me: a hoist at home
I'm aiming for a standard-lift height, 3.5tonne Tufflift 4-poster. According to the drawings, the top of the upper deck will be at 1.8m when it is raised. I'll have to run a tape measure over the FB to see how much lift I need to get an engine in/out, but that feels like it might almost work. I have to fit both the engine and the block and tackle in that space, so mebbe the lifting beam needs to go up on some packers (milk crates.... ) to give me enough headspace.
Cheers,
Harv
Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
-
- Posts: 1988
- Joined: Wed May 16, 2012 10:18 pm
- State: SA
- Location: South Australia
Re: School me: a hoist at home
Hi Harv
What width shed do you think you will need to accommodate the hoist and allow some space for you to move past the hoist and shed wall/structure? Thanks
Stephen
What width shed do you think you will need to accommodate the hoist and allow some space for you to move past the hoist and shed wall/structure? Thanks
Stephen
A day in the shed beats a day at work!
Re: School me: a hoist at home
The hoist is 2.6m wide.
I've got a standard, 1950's issue single car fibro shed at the moment. The new shed can be a bit wider, but the wider I go the less backyard space I end up with. I'd love a mega-shed, but know that if I do then I will only fill it with crap.
My mental picture is the hoist in the middle (so you can get at both sides of the car without turning it around), shoulders width each side of the hoist (so I can walk either side), plus the width of a cupboard either side. Mebbe 6-7m wide all up. I need to lay that out in chalk on the existing ground and see what it looks like.
Cheers,
Harv
I've got a standard, 1950's issue single car fibro shed at the moment. The new shed can be a bit wider, but the wider I go the less backyard space I end up with. I'd love a mega-shed, but know that if I do then I will only fill it with crap.
My mental picture is the hoist in the middle (so you can get at both sides of the car without turning it around), shoulders width each side of the hoist (so I can walk either side), plus the width of a cupboard either side. Mebbe 6-7m wide all up. I need to lay that out in chalk on the existing ground and see what it looks like.
Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
Re: School me: a hoist at home
i have both, my preferred is the 2 post free floor, only issue is you need 4.2m height at the apex, 4 post is good too but 2 is way better IMHO
Re: School me: a hoist at home
After a chat with Stephen in the shed the other evening, I went and pushed the button on a Tufflifts 4.5tonne free floor two post lift. I haven’t told mum yet. Now I have to clear out 17 years accumulated domestic detritus from shed bay one. It should just fit at 3.88 metres total height.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: School me: a hoist at home
You will love it, the only thing that an old fart like me struggles with is getting down to line up the pads underneath, once thats done though you suddenly realise its a small price to pay !!!!Errol62 wrote: ↑Sun Sep 01, 2024 4:41 pm After a chat with Stephen in the shed the other evening, I went and pushed the button on a Tufflifts 4.5tonne free floor two post lift. I haven’t told mum yet. Now I have to clear out 17 years accumulated domestic detritus from shed bay one. It should just fit at 3.88 metres total height.
Sent from my iPhone using Tapatalk
Greg
So many cars so little time!
Re: School me: a hoist at home
Yep , once you have a hoist in the shed you will realise they are a necessity not a luxury
I started with nothing and still have most of it left.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: School me: a hoist at home
I would kill for a hoist but no use now the boss wants to move back to Suburbia
Member of WA FB/EK Car Club
Frankenstein EK V6 Ute
The Reverend FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
Frankenstein EK V6 Ute
The Reverend FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
Re: School me: a hoist at home
Well that didn’t work. Me drunk shopping on Facebook. Just as well.
I had the apparent hoist guru around this afternoon to look at my shed. A four post will be the best solution for me, particularly with the 76 Land Cruiser, as well as my 100mm slab. Scissor was the next option, however I want to be able to park the ute underneath with the Impreza on top.
Also apparently, he is flat out, though the lead time is about 4 weeks. Hopefully I will get home have another chat about this either Stephen over the sa club cruise this Sunday.
Sent from my iPhone using Tapatalk
I had the apparent hoist guru around this afternoon to look at my shed. A four post will be the best solution for me, particularly with the 76 Land Cruiser, as well as my 100mm slab. Scissor was the next option, however I want to be able to park the ute underneath with the Impreza on top.
Also apparently, he is flat out, though the lead time is about 4 weeks. Hopefully I will get home have another chat about this either Stephen over the sa club cruise this Sunday.
Sent from my iPhone using Tapatalk
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
-
- Posts: 1988
- Joined: Wed May 16, 2012 10:18 pm
- State: SA
- Location: South Australia
Re: School me: a hoist at home
Hmmm…… always lots of things to consider with brands, models, power, shed size……………..
A day in the shed beats a day at work!
Re: School me: a hoist at home
https://tufflift.com.au/product/4-post- ... ard-heightErrol62 wrote: ↑Fri Sep 13, 2024 6:29 pm Well that didn’t work. Me drunk shopping on Facebook. Just as well.
I had the apparent hoist guru around this afternoon to look at my shed. A four post will be the best solution for me, particularly with the 76 Land Cruiser, as well as my 100mm slab. Scissor was the next option, however I want to be able to park the ute underneath with the Impreza on top.
Also apparently, he is flat out, though the lead time is about 4 weeks. Hopefully I will get home have another chat about this either Stephen over the sa club cruise this Sunday.
Sent from my iPhone using Tapatalk
Is this sort of thing your thinking of Clay?
Re: School me: a hoist at home
Yes Phil. Pretty easy to instal I believe. The hard part is getting rid of all our accumulated stuff. Every time I find another thing that needs doing under the car, I decide it can wait. Today I discovered the muffler has cracked around the outlet.
FB ute fixer upper, EK van on rotisserie
FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie