Project 2.

[Brett027]

Inner sill finally on. A few welds and a bit of tin inside the cab to complete once it's back on the rotisserie.

I'm not sure why, but this one has been a real struggle.
Hopefully the outer will go on a bit easier.

Sent from my SM-G975F using Tapatalk

[Errol62]

Original door going on Brett or one from another vehicle?

FB ute driver, EK van project

[Brett027]

Donor door Clay.

[Orange Betty]

Inner sill finally on. A few welds and a bit of tin inside the cab to complete once it's back on the rotisserie.

I'm not sure why, but this one has been a real struggle.
Hopefully the outer will go on a bit easier.

Sent from my SM-G975F using Tapatalk

Great shot Brett. The bottom A pillars to sill on both sides of mine were so rusted and as I rebuilt them in-situ I didn't consider that the curved section of the A pillar continued to the lower edge of the sill. I'd be missing that 'internal' bit now... Oops. Your shot puts it all into perspective!

Keep up the great work

Dave

[Errol62]

Donor door Clay.

Hope it fits well Brett.


FB ute fixer upper, EK van on rotisserie

[Brett027]

You'll see soon enough!

[Errol62]

FB ute driver, EK van project

[Brett027]

I'm glad there are not 4 of them like last time

[Errol62]

Yes but you got to deal with that bottom quarter access issue instead

FB ute driver, EK van project

[Brett027]

Just for Clay

Sent from my SM-G975F using Tapatalk

[Errol62]

FB ute driver, EK van project

[Brett027]

Bit of sill action. Not perfect but should be neat and strong enough. Sills are hard work and second only in frustration rating to sedan doglegs for me.

Sent from my SM-G975F using Tapatalk

[Errol62]

Good stuff. They're only noticeable on a hoist. That's my coping strategy.

FB ute driver, EK van project

[Errol62]

You must have a lot of drivers doors if you have to number them. Heh, heh...

FB ute driver, EK van project

[Brett027]

I have 6 ute doors and 2 utes so only a modest surplus. Maybe this door was off a country racer.
I'm going to paint these sills black, a contrast to the Electra Blue body so they will stand out a bit. Gaps are good so will be fine.
Floor panel is 10mm away from sill lip so that will require a fix.