Careful, there’s a fine line between an appreciator of fine things and a PERVERTBlacky wrote:Damn that is a seriously good body
FB ute fixer upper, EK van on rotisserie
FB Standard Wagon
Re: FB Standard Wagon
FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
-
FbSTDwagon
- Posts: 790
- Joined: Thu Jul 02, 2020 3:04 am
- State: SA
Re: FB Standard Wagon
What body are you talking about? Georges wagon in the front garden?
If so yes she looks alright in the photos but the floor is basically non existent.
Was on its belly for 30 years.
Drew
-
FbSTDwagon
- Posts: 790
- Joined: Thu Jul 02, 2020 3:04 am
- State: SA
Re: FB Standard Wagon
Welded in a new lower rear quarter section.
Haven’t done a job like this before and I’m pretty happy how it turned out.
Is it perfect? No, but neither is the rest of the car!
Haven’t done a job like this before and I’m pretty happy how it turned out.
Is it perfect? No, but neither is the rest of the car!
- Attachments
-
- 446CA33E-7E80-4575-8ACD-EA9FC7EDFFAD.jpeg (116.77 KiB) Viewed 556 times
-
- 5187350A-E7D7-4199-84D3-A2AAC942D64E.jpeg (113.37 KiB) Viewed 556 times
-
- 705AF7B6-C50D-4BE6-80BD-5E006B5E16B9.jpeg (104.46 KiB) Viewed 556 times
-
- A6C1D5C6-FE9E-4156-9CC4-CC28EA42C9DF.jpeg (100.36 KiB) Viewed 556 times
-
- 7B1D704C-FB26-4B86-BF41-7BEE6AA63553.jpeg (103.56 KiB) Viewed 556 times
-
- 28033903-8F15-4183-850E-01DFAE15383B.jpeg (96.07 KiB) Viewed 556 times
-
- 1CB3659F-10BC-46C6-8962-A3C0BA3FCC75.jpeg (82.65 KiB) Viewed 556 times
-
- 15593605-21CA-4628-BD82-C1BB2C3885EC.jpeg (102.74 KiB) Viewed 556 times
Drew
-
FbSTDwagon
- Posts: 790
- Joined: Thu Jul 02, 2020 3:04 am
- State: SA
Re: FB Standard Wagon
Cleaned the old junk tar off the roof for the future job of separating some body deadner in there
- Attachments
-
- C85AF9A9-AB54-44BC-999C-A72D85FA7960.jpeg (915.09 KiB) Viewed 555 times
-
- FAED1A4B-E20B-4686-B462-7D4033A671CB.jpeg (864.48 KiB) Viewed 555 times
Drew
-
FbSTDwagon
- Posts: 790
- Joined: Thu Jul 02, 2020 3:04 am
- State: SA
Re: FB Standard Wagon
I spent some time on y frames to fix them up to standard, started on the battery tray area.
- Attachments
-
- B76D7CC5-BD65-4A2C-A810-E4513C9680ED.jpeg (147.94 KiB) Viewed 554 times
-
- 02A24675-A948-4E1A-B789-C4056B76F499.jpeg (135.07 KiB) Viewed 554 times
-
- CFAA05A5-6FB0-48DA-BD00-1BEF01132231.jpeg (136.54 KiB) Viewed 554 times
-
- 5E619C42-962B-4DE9-8424-BD492E23CE35.jpeg (140.37 KiB) Viewed 554 times
-
- 4C574A5E-6F37-4320-9445-7AB4B5206FA8.jpeg (157.09 KiB) Viewed 554 times
-
- DF85479D-7F81-4C7D-A81D-550E047513E8.jpeg (142.13 KiB) Viewed 554 times
-
- 3304ECDE-CD72-4169-943D-23AD1BFF66BA.jpeg (158.12 KiB) Viewed 554 times
-
- 46C17ED8-3D44-440A-B60D-22CEBE27F4DC.jpeg (155.94 KiB) Viewed 554 times
Drew
-
FbSTDwagon
- Posts: 790
- Joined: Thu Jul 02, 2020 3:04 am
- State: SA
Re: FB Standard Wagon
More y frame repairs
- Attachments
-
- 3BE70A35-55D1-43A7-AB28-7F3C1F0F7206.jpeg (114.31 KiB) Viewed 553 times
-
- 0FD57DCF-9881-486B-B7C3-D710F1FBFF44.jpeg (138.58 KiB) Viewed 553 times
-
- 89F1F917-AA33-4978-9BC0-63A26FB8ACF7.jpeg (117.79 KiB) Viewed 553 times
-
- 1CD4DF82-276D-4443-805B-DC88D1FE1B9B.jpeg (125.21 KiB) Viewed 553 times
-
- 12C99FEE-0000-4DE5-9D57-8F220DF6F2CC.jpeg (138.31 KiB) Viewed 553 times
-
- F654FFED-46D2-480A-9286-9F32F9AE9D35.jpeg (138.9 KiB) Viewed 553 times
-
- 76A7806A-3DDE-40A8-84D3-0306619F8957.jpeg (122.56 KiB) Viewed 553 times
Drew
-
FbSTDwagon
- Posts: 790
- Joined: Thu Jul 02, 2020 3:04 am
- State: SA
Re: FB Standard Wagon
And more y frame photos
- Attachments
-
- CC252AF7-242F-4413-8B83-8F118EBA8C68.jpeg (106.67 KiB) Viewed 552 times
-
- 1989553D-DDE9-464C-9CA9-070425ED912D.jpeg (81.88 KiB) Viewed 552 times
-
- 97295EEB-97E3-48FD-B168-61F18F2CBCA2.jpeg (77.56 KiB) Viewed 552 times
-
- 5DAA7EF4-A161-4ADF-8CAD-3C655BF8ECD5.jpeg (123.17 KiB) Viewed 552 times
-
- 6669067B-A17E-4699-8AAC-D61493303108.jpeg (95.36 KiB) Viewed 552 times
-
- E971B724-92C2-4DE9-82E0-E6B9C919795E.jpeg (105.57 KiB) Viewed 552 times
-
- F79F7ED3-0BB0-4156-A459-FF611914E69E.jpeg (111.68 KiB) Viewed 552 times
-
- B24AE0A8-7172-4B75-A35D-26EF840B9F54.jpeg (132.94 KiB) Viewed 552 times
Drew
-
FbSTDwagon
- Posts: 790
- Joined: Thu Jul 02, 2020 3:04 am
- State: SA
Re: FB Standard Wagon
And even more y frame pics
- Attachments
-
- 5FE03E0F-6113-4B65-9499-B4EE3100198F.jpeg (135.42 KiB) Viewed 551 times
-
- BE1E0A50-3C6E-4F4B-AA2A-399999720085.jpeg (171.69 KiB) Viewed 551 times
-
- C8F857E5-E624-4D06-8591-D876138886F9.jpeg (132.85 KiB) Viewed 551 times
-
- 7104724D-B1C8-4010-9CE5-FEA471336AA6.jpeg (127.43 KiB) Viewed 551 times
-
- 2CD8A676-8F87-460F-9B9B-2F8436D39461.jpeg (125.36 KiB) Viewed 551 times
-
- 8D13CB5E-FFA0-4DA9-AEA0-0D9AF6F097E6.jpeg (104.34 KiB) Viewed 551 times
-
- 83F4307E-5FB8-4BFC-BA0C-E204ACFC4AFC.jpeg (91.08 KiB) Viewed 551 times
-
- F51D10D3-A928-45F4-99AC-2830BD64B457.jpeg (113.27 KiB) Viewed 551 times
Drew
-
FbSTDwagon
- Posts: 790
- Joined: Thu Jul 02, 2020 3:04 am
- State: SA
Re: FB Standard Wagon
A funky little repair that was easier than expected.
Cut a good bit out of the wreck and just welded it in.
File sander worked well to do all the radius’ to match the others.
(Fully finished photo not shown.
Cut a good bit out of the wreck and just welded it in.
File sander worked well to do all the radius’ to match the others.
(Fully finished photo not shown.
- Attachments
-
- CAC73056-D996-4611-B2FF-B13E84A0F27A.jpeg (106.5 KiB) Viewed 549 times
-
- 68B5CF1F-9E1F-4697-B84E-56303E6CBBE0.jpeg (91.62 KiB) Viewed 549 times
-
- D659C9FE-E3D4-49C2-A0C6-85D779EFB218.jpeg (111.55 KiB) Viewed 549 times
-
- DAD5DBE3-3673-4F5C-A1F7-0B4561B5BA25.jpeg (78.24 KiB) Viewed 549 times
-
- A14DCADB-DF67-4C36-B6E2-E0AE465EA98C.jpeg (86.34 KiB) Viewed 549 times
-
- DA4AA7F3-76D5-4023-80DE-53C779CD8206.jpeg (117.61 KiB) Viewed 549 times
-
- C0430C3A-3C4F-4EB5-A766-E2050D7BC19B.jpeg (107.73 KiB) Viewed 549 times
Drew
-
FbSTDwagon
- Posts: 790
- Joined: Thu Jul 02, 2020 3:04 am
- State: SA
Re: FB Standard Wagon
Getting the frames to a point where I was ready to fit to the car to finish welding the front tie member all square to the car
- Attachments
-
- ECCBA2CE-4F04-45C7-ACB2-6392C783B844.jpeg (123.99 KiB) Viewed 548 times
-
- EA258791-CCFB-41D8-93F4-7B6AA48AB49F.jpeg (101.57 KiB) Viewed 548 times
-
- 90B3F86A-3A87-4CFC-A6FE-4AF30D7C8F6B.jpeg (86.87 KiB) Viewed 548 times
-
- 076A9739-A92E-46EC-B708-0836282C3E9D.jpeg (113.58 KiB) Viewed 548 times
-
- 49999F5B-D2F3-4FBD-A413-A78D9E8D2BD9.jpeg (102.24 KiB) Viewed 548 times
-
- 2F44BAC7-75BC-49A1-96E1-629776DA62AA.jpeg (142.88 KiB) Viewed 548 times
-
- 419D0B91-167C-4AF2-B46E-9DF6B1D3527B.jpeg (119.11 KiB) Viewed 548 times
Drew
-
FbSTDwagon
- Posts: 790
- Joined: Thu Jul 02, 2020 3:04 am
- State: SA
Re: FB Standard Wagon
Got it on the car and welded it all true.
Making finishing touches before painting it
Making finishing touches before painting it
- Attachments
-
- 75D3684A-FEF5-432B-B326-43B28CDE9820.jpeg (100.72 KiB) Viewed 546 times
-
- 5ED2A681-52AE-46A9-BDAA-39283FAF188B.jpeg (138.88 KiB) Viewed 546 times
-
- 7B4AC762-D507-46FD-83FE-012A29190EE6.jpeg (126.92 KiB) Viewed 546 times
-
- 7E1A3DB5-6B59-4209-B7A8-DD03ADD9B1DE.jpeg (101.34 KiB) Viewed 546 times
-
- 66ECC400-4569-4FFD-A44B-466323A1E295.jpeg (126.11 KiB) Viewed 546 times
-
- EC4EF743-6C79-4700-9AA1-96850F935201.jpeg (136.54 KiB) Viewed 546 times
-
- B8E67878-9188-4584-B587-0F29C5B67625.jpeg (167.14 KiB) Viewed 546 times
-
- CF939B49-7412-4123-A1E1-6B544EB49541.jpeg (142.7 KiB) Viewed 546 times
Drew
-
FbSTDwagon
- Posts: 790
- Joined: Thu Jul 02, 2020 3:04 am
- State: SA
Re: FB Standard Wagon
And this is where I am up to as of today….
I looking the finish the y frames in GMH black and get it out of my shed so I can get cracking on sealing the underbody.
The y frames will live under my carport until I’m ready to fit them.
In that time I’ll flood all the internals with cavity wax so hopefully it’s all set and cured when I fit the frame up.
Pretty freaky to look back on what has been 6 months of pretty solid work.
I looking the finish the y frames in GMH black and get it out of my shed so I can get cracking on sealing the underbody.
The y frames will live under my carport until I’m ready to fit them.
In that time I’ll flood all the internals with cavity wax so hopefully it’s all set and cured when I fit the frame up.
Pretty freaky to look back on what has been 6 months of pretty solid work.
- Attachments
-
- 109450E1-BB26-46A8-9945-AE7B14D28B74.jpeg (64.41 KiB) Viewed 645 times
-
- 913B07BF-D624-4B3C-8F44-E9147B5DD036.jpeg (138.1 KiB) Viewed 645 times
-
- BBCE8E7B-867F-4922-8B34-6F19D31183FE.jpeg (124.39 KiB) Viewed 645 times
-
- B0F0668A-86A2-4A6C-8B64-FDDD0D9327EA.jpeg (113.13 KiB) Viewed 645 times
-
- 449EF8BF-CA28-4C64-B531-9A1A04ED51CA.jpeg (128.27 KiB) Viewed 645 times
-
- DE458432-6EEF-45BC-A66D-A7D5E2C45C60.jpeg (125.62 KiB) Viewed 645 times
-
- F4CE2414-0B59-441B-A5A9-AE8AB2EFA943.jpeg (134.05 KiB) Viewed 645 times
-
- B88708F3-1CA9-4078-8B87-C8ACDF93F669.jpeg (131.88 KiB) Viewed 645 times
Drew
Re: FB Standard Wagon
Well - thats quite an update !!! Looking great mate 
I started with nothing and still have most of it left.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: FB Standard Wagon
Bloody textbook Drew. You are making it look easy.
FB ute fixer upper, EK van on rotisserie
FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie