EK Ute Build Month/Year

If it doesn't fit below then post here and see if another FB EK fanatic can help you out.

Moderators: reidy, Blacky

Post Reply
62ekute
Posts: 645
Joined: Thu May 23, 2019 6:58 pm
State: ACT

EK Ute Build Month/Year

Post by 62ekute »

Can anyone tell me what month/year my EK Ute was built based on the following info?

EK29258M
EK2106-2845M

thanks

Patrick
Attachments
14.jpg
14.jpg (57.57 KiB) Viewed 927 times
f.jpg
f.jpg (44.26 KiB) Viewed 927 times
User avatar
FJWALLY
Posts: 1833
Joined: Wed Nov 11, 2015 4:54 pm
State: VIC
Location: Forest Hill

Re: EK Ute Build Month/Year

Post by FJWALLY »

Send to steve jackson or sunny tim - they have some great records


You’ll find me lost somewhere!
You will find me lost somewhere!
62ekute
Posts: 645
Joined: Thu May 23, 2019 6:58 pm
State: ACT

Re: EK Ute Build Month/Year

Post by 62ekute »

I previously messaged SunnyTim when Blacky suggested it - but haven't received a response. Yesterday, I tried to message SunnyTim again, but my message is still in my outbox...does this mean his inbox is full?

I saw on another post that Steve Jackson doesn't have much to do with this forum anymore but is on facebook (I don't do facebook)

If anyone else would be willing to contact either of these two with my info - or have any other leads it would be appreciated

thanks
Patrick
gpi
Posts: 1131
Joined: Mon Apr 26, 2010 2:08 pm
State: VIC

Re: EK Ute Build Month/Year

Post by gpi »

it was built between the release of 2 inferior models. you can roughly work it out by searching this forum from information posted by Dr Terry.
62ekute
Posts: 645
Joined: Thu May 23, 2019 6:58 pm
State: ACT

Re: EK Ute Build Month/Year

Post by 62ekute »

I haven't really gotten anywhere with this --- so being EK29258M I've 'decided' it's January 1962.

Patrick
ardiesse
Posts: 1181
Joined: Thu Jan 19, 2017 9:57 am
State: NSW
Location: Sydney

Re: EK Ute Build Month/Year

Post by ardiesse »

Patrick,

You can try reading the date codes cast onto such things as the engine block, cylinder head, inlet and exhaust manifolds, gearbox case and diff case. Generally I'd think that the manifolds and gearbox are most likely to be original.

The format is (letter) (one or two digits) (one digit)
The letter ranges from A (January) to M (December) for month, omitting "I".
The middle one or two digits are the day of the month.
The last digit is the year.

You can also date the car to within a quarter by looking carefully at the circular "Armourplate" symbol on the glass. There'll be a dot above one of the letters in "ARMOURPLATE", which is a year code. And there'll be another dot above the first to fourth letter of another word in the symbol, which tells you the quarter.

Rob
62ekute
Posts: 645
Joined: Thu May 23, 2019 6:58 pm
State: ACT

Re: EK Ute Build Month/Year

Post by 62ekute »

Thanks Rob
User avatar
Errol62
Posts: 11310
Joined: Sat Dec 06, 2014 2:44 pm
State: SA
Location: Adelaide

Re: EK Ute Build Month/Year

Post by Errol62 »

I was lucky with my van. When I pulled the floor up there was a page of the Adelaide Advertiser classifieds jobs section dated end of August 1962. Subframe is stamped EK15xxxA which seems low for that date though and looked original. EK2104-7079A body plate not a valid comparison as all van bodies came from the Woodville Adelaide plant.


FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
62ekute
Posts: 645
Joined: Thu May 23, 2019 6:58 pm
State: ACT

Re: EK Ute Build Month/Year

Post by 62ekute »

thanks again Rob ... that info helped much more than my 29xxx of 48xxx calculation

I'll call it March 1962 (for now?) ... I found markings as per below

most of the glass is 1st quarter 1962 (some glass is 4th quarter 1961)
engine block is March 1962
diff is February 1962

Patrick
ardiesse
Posts: 1181
Joined: Thu Jan 19, 2017 9:57 am
State: NSW
Location: Sydney

Re: EK Ute Build Month/Year

Post by ardiesse »

Patrick,

There's usually two to three months between the casting date and when the car was sold new. Since you have some March '62 castings, I'd say your ute was sold in May or June.

Rob
62ekute
Posts: 645
Joined: Thu May 23, 2019 6:58 pm
State: ACT

Re: EK Ute Build Month/Year

Post by 62ekute »

thanks Rob

... it was advertised as a '62 (by someone who didn't have many details)

...initially I was just keen to confirm that it was a '62 (mainly so I wouldn't have to change my userid :half: ) ...anyway, let's call it May '62 as likely first registration (for now?)

Patrick
62ekute
Posts: 645
Joined: Thu May 23, 2019 6:58 pm
State: ACT

Re: EK Ute Build Month/Year

Post by 62ekute »

engine markings are March 62 - engine number is B293648 (don't know if it's original)
subframe number is EK29258M
id plate number is EK2106-2845M
Post Reply