Introduction from Andrew

Post photos of your pride and joy, or updates on your rebuild!

Moderators: reidy, Blacky

Fex
Posts: 103
Joined: Tue Aug 27, 2019 9:01 pm
State: QLD

Introduction from Andrew

Post by Fex »

I have been lurking in the background of the site for a while now so figured I should introduce myself. In my earlier days I was fixated on FX and FJ utes. Finally bought an Fx ute that required a full rebuild. I started to strip it down but realised it was going to take forever. I really wanted something to drive in the meantime. I ended up buying an EK sedan which I picked up in 2006. It’s a fairly original car with around 54k miles on the clock. I think a few of the guys on the site are familiar with the car when it was owned by a previous owner. The car was originally from Gympie. A bloke bought it off the original owners’ son about 20 years ago where it had been siting under the house. The back end had been sunburnt so it was given a respray. A couple of owners later it was mine.

When I picked it up I drove it from the Gold Coast area to Brisbane where I stayed at my mates house for the weekend. On the Sunday I started to drive it back to Toowoomba. I had just got onto the rural part of the drive when a fairly ordinary sounding thud, followed by a quick succession of thud, thud, thud, thud, thud until I pulled over. I thought it might have been a wheel bearing or something. I got out to see smoke spewing out from the rear tyre. I started crapping the dacks as I envisaged my new car bursting into flames on the side of road with no fire extinguisher at hand. I started shaking the bottle of coke I had in a vain attempt to improvise. The, more than likely, “puff” of smoke dissipated. I had absolutely nothing with me in the way of tools (or knowledge to go with them for that matter) to see what was going on. I ended up ringing my brother who drove from the Gold Coast, hiring a car trailer on the way and towed it back to Toowoomba. A leisurely several hour round trip for him (what else are brother for..). Turns out one of the brake shoes threw a lining and was flapping around in the drum.

All I have really done is stainless sleeve the brake cylinders new linings on the shoes and new flexible lines. Unfortunately it doesn’t get out much at the moment. It hasn’t been driven for a few years so the brakes need freeing up again. The aim is to have it at the Nationals in Toowoomba next year. A couple of years ago I lived about 200m from City Golf Club where the diner is being held so I could have just rolled it down to the carpark.. It has a few other things to attend to that annoy me that I will also try to get to. Even with everything else that goes on at home I think I have a realistic timeframe to at least get the brakes sorted so I can trundle into town!

I still have the first FX ute I bought. It’s partially reassembled now (no repair work undertaken..) and has dropped several spots down the list. It will most likely get looked at as a car for the kids when they grow up, one is a toddler and the other is farm fresh. The first cab off the rank is an FJ van. Bit of a basket case but hard to find so it will do. It’s just a shell, so have a donor ute for it. I will start an engine rebuild for it soon to try to keep things ticking along. No idea how to rebuild a motor but the father in law is a vintage tractor nutter so he is going to assist when the inlaws turn up a couple of times a year.

A couple of pics for interest. It’s pretty hard to get a good photo with the limited space and lighting in the shed. Also some of the books etc if anyone is keeping a register of “the numbers”.
Cheers, Andrew
DSC00019.JPG
DSC00019.JPG (801.06 KiB) Viewed 1039 times
IMG_2362.JPG
IMG_2362.JPG (738.36 KiB) Viewed 1039 times
IMG_2357.JPG
IMG_2357.JPG (785.27 KiB) Viewed 1039 times
IMG_2354.JPG
IMG_2354.JPG (808.8 KiB) Viewed 1039 times
IMG_2352.JPG
IMG_2352.JPG (528.08 KiB) Viewed 1039 times
IMG_0154.JPG
IMG_0154.JPG (213.06 KiB) Viewed 1039 times
IMG_0153.JPG
IMG_0153.JPG (577.26 KiB) Viewed 1039 times
IMG_0152.jpg
IMG_0152.jpg (638.91 KiB) Viewed 1039 times
In the Shed
Posts: 2264
Joined: Wed May 16, 2012 10:18 pm
State: SA
Location: South Australia

Re: Introduction from Andrew

Post by In the Shed »

G’day Andrew
Welcome to the forum. That looks like a very tidy ride you have there. Good to see you have books and history to go with the car. Before long you will have a couple of apprentices (kids) to help you keep the car running.

Regards
Stephen
A day in the shed beats a day at work!
User avatar
Harv
Posts: 5721
Joined: Mon Oct 08, 2007 2:00 pm
State: NSW
Location: Sydney, Australia

Re: Introduction from Andrew

Post by Harv »

Very nice EK sedan.
In the Shed wrote: Wed Sep 25, 2019 2:17 pmBefore long you will have a couple of apprentices (kids) to help you keep the car running.
Enjoy the apprentice years. Soon after that, the kids get driving licenses. I feel like a speedway crew chief: child takes the car out for a few hot laps, brings it back, and I have half a dozen things to repair, replace or rebuild :lol:

Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
User avatar
Wrongway Roger
Posts: 759
Joined: Fri Jun 20, 2014 7:06 pm
State: SA
Location: Adelaide

Re: Introduction from Andrew

Post by Wrongway Roger »

Welcome to the forum.
Lots of knowledge here that everyone seems willing to share.
Hope to see you next year at the Nationals.
Cheers
Roger
There is a right way and a wrong way and then there is my way which is usually the long way.
User avatar
Errol62
Posts: 11585
Joined: Sat Dec 06, 2014 2:44 pm
State: SA
Location: Adelaide

Re: Introduction from Andrew

Post by Errol62 »

Very nice looking car and some great projects Andrew


Sent from my iPhone using Tapatalk
getting my FB ute on the road
EK van on rotisserie
BS
Posts: 472
Joined: Thu Jul 31, 2008 8:31 pm
State: NOT ENTERED
Location: Brisbane

Re: Introduction from Andrew

Post by BS »

Sedan looks good

Sent from my SM-N960F using Tapatalk

Blacky
Posts: 14175
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: Introduction from Andrew

Post by Blacky »

Welcome to the forum mate 8) nice, nice, nice

Nice car :thumbsup:

Nice shed :thumbsup: :thumbsup:

Nice projects 8)
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
User avatar
FireKraka
Posts: 2782
Joined: Fri Jan 24, 2014 11:12 am
State: WA
Location: Rockingham, WA

Re: Introduction from Andrew

Post by FireKraka »

Hi Andrew
Very nice looking sedan mate and good luck with the other projects I really love those FJ utes but they are really hard to find now days.

Neil
Member of WA FB/EK Car Club
Frankenstein EK V6 Ute
The Reverend FB Station Wagon Project
User avatar
Brett027
Posts: 2517
Joined: Thu Apr 18, 2019 4:14 am
State: NSW

Re: Introduction from Andrew

Post by Brett027 »

Love the car and envious of the paperwork that goes with it. Facilities don't look half bad either. 😀 Thanks for the posting. Welcome to the rough and tumble of the forum. You'll find there are some notorious and clever peeps here.
Sucker for a rusty bomb
User avatar
Errol62
Posts: 11585
Joined: Sat Dec 06, 2014 2:44 pm
State: SA
Location: Adelaide

Re: Introduction from Andrew

Post by Errol62 »

FJ vans are even rarer


Sent from my iPhone using Tapatalk
getting my FB ute on the road
EK van on rotisserie
EK283
Posts: 2674
Joined: Thu Mar 16, 2006 9:51 pm
State: NSW
Location: SYDNEY NSW

Re: Introduction from Andrew

Post by EK283 »

Very nice car !

I keep saying I'm going to a nationals but bloody hell I just cant get the time !

I'm going to have to make time this year, no more excuses !!

Greg
So many cars so little time!
User avatar
FJWALLY
Posts: 1833
Joined: Wed Nov 11, 2015 4:54 pm
State: VIC
Location: Forest Hill

Re: Introduction from Andrew

Post by FJWALLY »

Very nice Sedan Andrew - thanks for sharing and welcome.
You will find me lost somewhere!
User avatar
mph
Posts: 787
Joined: Fri Oct 19, 2012 12:09 am
State: WA
Location: Perth's North

Re: Introduction from Andrew

Post by mph »

very nice
FB-Special
Big block 161 :lol:
Holley sniper EFI.
Vintage air ducted heat and cool.
Ek auto column shift.
Lj diff and reverse lights.
WA FB~EK Car Club Member.
Fex
Posts: 103
Joined: Tue Aug 27, 2019 9:01 pm
State: QLD

Re: Introduction from Andrew

Post by Fex »

Harv wrote: Wed Sep 25, 2019 2:44 pm Very nice EK sedan.
In the Shed wrote: Wed Sep 25, 2019 2:17 pmBefore long you will have a couple of apprentices (kids) to help you keep the car running.
Enjoy the apprentice years. Soon after that, the kids get driving licenses. I feel like a speedway crew chief: child takes the car out for a few hot laps, brings it back, and I have half a dozen things to repair, replace or rebuild :lol:

Cheers,
Harv
Harv. Here’s the older apprentice. I was pulling a motor down and showing her what sockets are and how they work. Turned away for a minute and then turned back. Daddy “did you touch the tools?”. 3 year old shakes her head. Daddy “did you touch the tools?” 3 year old sheepishly nods. It appears her nose is around 5/8th...
D7217342-20E5-4927-AB4B-696E584EEFA7.jpeg
D7217342-20E5-4927-AB4B-696E584EEFA7.jpeg (304.99 KiB) Viewed 744 times
rosco
Posts: 2569
Joined: Wed Feb 04, 2004 8:34 pm
State: VIC
Location: Melbourne

Re: Introduction from Andrew

Post by rosco »

Welcome aboard, Andrew... what a doozie you have... envy of almost everyone here.
I have some suggestions that rarely make the light of day about preservation... we'll chat in due course, I'm sure.

Car is "schmick" that I can see... please tell me you are keeping it original - nothing I see should be changed.. it's perfect.

PM me if you want info on what I have done to preserve the metal.. if it's a dry weather only vehicle, no rush.. if you are going to get it wet - I'd like to offer you some suggestions.. simple stuff at first, just to check... then some suggestions to keep the muck out of it...

Oops, forgot to mention - as it happens, the national championships of the FB/EK clubs of Australia are on over the Queen's birthday weekend this year in Toowoomba.. funny that!.... check in with Sunny Tim for details... they are also listed on this site.

frats,
Rosco
Last edited by rosco on Tue Jan 21, 2020 10:00 am, edited 1 time in total.
Post Reply