FB EK original looking ignition leads on eBay

If it doesn't fit below then post here and see if another FB EK fanatic can help you out.

Moderators: reidy, Blacky

Post Reply
mpeck83
Posts: 44
Joined: Sat Jan 07, 2012 4:27 pm
State: NOT ENTERED
Location: Melbourne

FB EK original looking ignition leads on eBay

Post by mpeck83 »

Hi guys, just wondering if anyone has brought a set of reproduction ignition leads on for there FB or EK on eBay from gmhnasco @ $125 and what your thoughts on them were? Looking to keep the engine bay if my FB as original as possible and thought these would be a good addition. Not sure how to paste the link but here's a photo.
Cheers guys.
Attachments
image.jpg
image.jpg (64.09 KiB) Viewed 835 times
Blacky
Posts: 13334
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: FB EK original looking ignition leads on eBay

Post by Blacky »

heres the link to the ad - personally I wouldn't buy them but if you are looking for as close to original as possible ...........

http://www.ebay.com.au/itm/Holden-FE-FC ... 233da728d6
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
fastjbav6
Posts: 162
Joined: Mon Jul 12, 2004 1:30 am
State: WA
Location: Fremantle WA

Re: FB EK original looking ignition leads on eBay

Post by fastjbav6 »

I use to make these back in the 1980's. The main issue is electrical interference with car radio and household TV's as you drive down the street.(may affect other electronics now)
I remember my Lecturer saying they were illegal to use back then but we still made them. Passed them off as OEM.

Regards Seb
Yellow Knight
Post Reply