BILLY
Mirrors
-
BILLY BLACKARROW
- Posts: 1065
- Joined: Thu Aug 21, 2008 9:22 pm
- State: NSW
- Location: NEWCASTLE MACQUARIE HILLS
Mirrors
Show me your external mirrors please as I am tossing up to use HQ mirrors or 4" pep mirrors, I am a bit concerned about how much you can see with peep mirrors , HQ mirrors may look out of place even though it isn't stock I know it's my car and I can do what I like but I am having trouble visualizing it
BILLY
BILLY
BILLY BLACKARROW
MY Father always said do the hard part first --because when you are OVER IT you only have the easy part left to do THINGS I HAVE TRIED TO LIVE BY
MY Father always said do the hard part first --because when you are OVER IT you only have the easy part left to do THINGS I HAVE TRIED TO LIVE BY
Re: Mirrors
I have no external mirrors on my ute and it can be a PITA , my sedan had peep mirros and they worked well.
I started with nothing and still have most of it left.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: Mirrors
My EH has 4" pep mirrors. No problems at all
-
bootlegger
- Posts: 2070
- Joined: Sat Sep 26, 2009 7:52 pm
- State: NOT ENTERED
- Location: sydney
Re: Mirrors
The hq mirrors will look crap. If you cant get the original ones id go peep mirrors or period wibroc style ones.
Re: Mirrors
Have a look at some of the American websites , I buy a lot of stuff off Ther Filling Station - http://www.fillingstation.com , they have heaps of different styles of mirrors and they will freight via USPS so the freight wont break the bank.
I started with nothing and still have most of it left.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: Mirrors
I went the 4" peep for the FB... can see no problems.
Be careful with a car going for engineering though... VSB makes the ADR's compulsory for mirrors ("A flat or convex external rear vision mirror complying with the latest version of ADR14
must be fitted to the driver’s side of the vehicle")... check that your engineer doesn't want to see an ADR compliance sticker (some do).
Cheers,
Harv
Be careful with a car going for engineering though... VSB makes the ADR's compulsory for mirrors ("A flat or convex external rear vision mirror complying with the latest version of ADR14
must be fitted to the driver’s side of the vehicle")... check that your engineer doesn't want to see an ADR compliance sticker (some do).
Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
Re: Mirrors
Had a small peep mirror on the green sedan drivers side only i think it was a 4inch no dramas seeing
would look much better then a hq one
would look much better then a hq one
EK JAY SINCE 1990