Rebuilding of Old Timer (EK wagon)

Sputzwagon · Post by **Sputzwagon** » Mon Mar 25, 2013 10:53 pm

...this will probably be the last time the Sputzwagon 2 will make the Nat's in it's present guise..as the next time the National folk will see it it'll have a lower lid and changed rear 1/4's & be Jade Green..Sputzwagon 2.1..

Scotty.

Marty K Bird · Post by **Marty K Bird** » Mon Mar 25, 2013 11:55 pm

Looking awesome man !

fb cruisin · Post by **fb cruisin** » Tue Mar 26, 2013 12:16 am

Looking great Stewart

Post by **Blacky** » Tue Mar 26, 2013 12:54 am

Sputzwagon wrote:...this will probably be the last time the Sputzwagon 2 will make the Nat's in it's present guise..as the next time the National folk will see it it'll have a lower lid and changed rear 1/4's & be Jade Green..Sputzwagon 2.1..

Scotty.

Looking forward to THAT Scotty

minifb · Post by **minifb** » Thu Mar 28, 2013 12:05 am

Looking Good Mate

Brown Bear · Post by **Brown Bear** » Mon Apr 08, 2013 7:56 am

Looking great Stewart!

My guess is you are now making an effort NOT to finish it

or will you be into it on Anzac Day?

parisian62 · Post by **parisian62** » Mon Apr 08, 2013 12:17 pm

Many thanks for the replies...DR, Scotty, Tony Tinfloorboards, Marty, Rob, Blacky, Mark, Matthew...

More unwrapping of parts and bolting on....

parisian62 · Post by **parisian62** » Mon Apr 08, 2013 12:19 pm

This was fun...

parisian62 · Post by **parisian62** » Mon Apr 08, 2013 12:19 pm

Bit by bit...

parisian62 · Post by **parisian62** » Mon Apr 08, 2013 12:21 pm

Door bits n pieces and trim...

parisian62 · Post by **parisian62** » Mon Apr 08, 2013 12:22 pm

Where we're at now...

Had fun with the front headlights. They would only come on with high beam...

...found that I had 2 wires reversed on the high beam switch...

Back to the list...

1. All door rubbers - inners and outers - DONE
2. Polish exterior stainless and install - DONE
3. Hookup stereo and speakers - DONE
4. Install gearbox linkages and clutch master slave cylinder - DONE - NEEDS ADJUSTMENT
5. Front guards, stone tray, grill, bonnet, bumper bar - DONE
6. All badges NEARLY DONE
7. Wiper arms and motor - DONE
8. Seatbelts - DONE
9. All rear cargo area trim - TO DO
10. Front end electricals - headlights, blinkers, horn - DONE
11. Seats - DONE
12. Fix or replace drivers door lock - DONE
13. Finish all door mechanisms and fit door trims - DONE
14. Fille gearbox with oil - DONE

Soooooo close now.

Craig Allardyce · Post by **Craig Allardyce** » Mon Apr 08, 2013 12:26 pm

looking good Stewart!!!

You'd have to be toeyer than a Roman sandle by now!

parisian62 · Post by **parisian62** » Mon Apr 08, 2013 12:31 pm

Thanks Craig. Too right!

Cal · Post by **Cal** » Mon Apr 08, 2013 12:34 pm

Good stuff, Stewart.

parisian62 · Post by **parisian62** » Mon Apr 08, 2013 12:42 pm

Thanks Pete and thanks again for those grommets. After going to American Autos, the ones I scrounged from old doors and the ones I got from you I had one spare...

fbekholden.com

Rebuilding of Old Timer (EK wagon)

Re: Rebuilding of Old Timer (EK wagon)

Re: Rebuilding of Old Timer (EK wagon)

Re: Rebuilding of Old Timer (EK wagon)

Re: Rebuilding of Old Timer (EK wagon)

Re: Rebuilding of Old Timer (EK wagon)

Re: Rebuilding of Old Timer (EK wagon)

Re: Rebuilding of Old Timer (EK wagon)

Re: Rebuilding of Old Timer (EK wagon)

Re: Rebuilding of Old Timer (EK wagon)

Re: Rebuilding of Old Timer (EK wagon)

Re: Rebuilding of Old Timer (EK wagon)

Re: Rebuilding of Old Timer (EK wagon)

Re: Rebuilding of Old Timer (EK wagon)

Re: Rebuilding of Old Timer (EK wagon)

Re: Rebuilding of Old Timer (EK wagon)