Re-trim - help/opinions

Includes seating, upholstery, door trims, dashboard and heater.

Moderators: reidy, Blacky

Post Reply
Woody01
Posts: 321
Joined: Thu May 12, 2011 7:00 pm
State: WA
Location: Dampier - WA

Re-trim - help/opinions

Post by Woody01 »

Hey guys,

Going about it abit back to front - trim before panel and paint, but will be driving the ek to Perth from Brisbane, shortly and the seats are fairly saggy, so I have them booked in for some loving at the start of August.

I'm going to get the seats re trimmed, aswell as door cards, kick panels, new carpet, parcel shelf. I'm not taking the ek back to original condition, so I don't mind abit of custom in the design, aslong as its clean, classy and simple. I will however be painting the car as per original colours (seaforth green, snowcrest white roof).

The codes I have from previous owners post on here are as follows:

Body- EK225-6580-S
Paint- 585-4588
- 585-0246
Trim- 718-968

Im basically after people's ideas and opinions on what they think would go well with the paint combo, in regards to trim colours, and designs. I'm thinking a full white interior might look abit tacky....don't want to stuff up a big decision.

Thanks in advance.
Woody - UMX-282
FB EK Club WA
Foundation Member # 138
User avatar
MeFB
Posts: 1717
Joined: Wed Oct 26, 2011 2:08 pm
State: NOT ENTERED
Location: WA and Lumut

Re: Re-trim - help/opinions

Post by MeFB »

Seaforth green isn't a very dark colour, so i'd go for a darker green inside with seat inserts in a lighter green or light grey. But then again, I'm not known for my fashion sense :lol:

This is a seaforth that's for sale on Carpoint just now. I think the grey looks excellent.

Image

It's probably best to take a sample of seaforth painted metal to an upholsterer specialising in classic cars and see what he suggests from the colours and patterns that are available today. If your glovebox door or ashtray lid is still Seaforth, then they are good pieces to take with you.

:arrow: :D
Alan
Member No.1 of the FB EK Holden Car Club of WA (Woo-hoo :D sweet!)
Woody01
Posts: 321
Joined: Thu May 12, 2011 7:00 pm
State: WA
Location: Dampier - WA

Re: Re-trim - help/opinions

Post by Woody01 »

Hey mefb,

That interior does look neat, will look at some green/grey combos. Ties in with the dash top being grey too. I'm still undecided wether to do mine all green or with grey ontop.

I've been looking at a lot of photos and I'm starting to like the look of the one colour interiors. I plan on getting some paint mixed so I can make samples, the only spot with original paint that I have found so far is the bottom of the glove box hinge.

If anyone has pics of their re trimmed interiors, or their favourite interiors throw them up. I'll chuck up some Ive saved soon for opinions...

Ohyeah - cam at north coast custom trim will be doing the work. Same guy that did mez's 2door ek.

Cheers.
Woody - UMX-282
FB EK Club WA
Foundation Member # 138
User avatar
Cal
Posts: 2796
Joined: Sat Nov 08, 2008 8:07 pm
State: NOT ENTERED
Location: Sydney

Re: Re-trim - help/opinions

Post by Cal »

Timmy's interior.


Image
Woody01
Posts: 321
Joined: Thu May 12, 2011 7:00 pm
State: WA
Location: Dampier - WA

Re: Re-trim - help/opinions

Post by Woody01 »

that is one clean interior, i like the dark green against the lighter green - onto a winner there. thanks for posting that Cal, wouldn't happen to have anymore pics of it, or the whole car?

now to decide weather to change up the design a little, add some pleats, different lines etc. something simular to what ek61 (i think it is) had trimmed up.
Woody - UMX-282
FB EK Club WA
Foundation Member # 138
User avatar
Cal
Posts: 2796
Joined: Sat Nov 08, 2008 8:07 pm
State: NOT ENTERED
Location: Sydney

Re: Re-trim - help/opinions

Post by Cal »

It's forum member Timmy's car.

Stunning car 8)


Image


Image
Woody01
Posts: 321
Joined: Thu May 12, 2011 7:00 pm
State: WA
Location: Dampier - WA

Re: Re-trim - help/opinions

Post by Woody01 »

Will have a look through the build threads see if I can find it.

Defintly jealous!!!!
Woody - UMX-282
FB EK Club WA
Foundation Member # 138
User avatar
stinky
Posts: 902
Joined: Tue Oct 11, 2005 10:06 pm
State: SA
Location: Willaston, South Australia

Re: Re-trim - help/opinions

Post by stinky »

I think two or tri-colour interiors are great in the older Holdens, something along the original styling also. If you veer too far away from factory styling you have to get it exactly "right" or it can look like rubbish.
How about black (vinyl or cloth) seat inserts (where your back and bum goes) with a light green vinyl elsewhere and a white piping?
User avatar
MeFB
Posts: 1717
Joined: Wed Oct 26, 2011 2:08 pm
State: NOT ENTERED
Location: WA and Lumut

Re: Re-trim - help/opinions

Post by MeFB »

stinky wrote:How about black (vinyl or cloth) seat inserts (where your back and bum goes) with a light green vinyl elsewhere and a white piping?
When I first read that I thought ImageImageImage

But having thought about it, I've completely changed my mind and I definitely have to agree that it would look very, very Image

Kinda like an old Polly gas pump:

Image
Alan
Member No.1 of the FB EK Holden Car Club of WA (Woo-hoo :D sweet!)
User avatar
Cal
Posts: 2796
Joined: Sat Nov 08, 2008 8:07 pm
State: NOT ENTERED
Location: Sydney

Re: Re-trim - help/opinions

Post by Cal »

Who ever retrimmed my seats in a past life put cloth inserts on them. It may not win prizes for originality, but the cloth is a hell of a lot more comfortable than vinyl.
Woody01
Posts: 321
Joined: Thu May 12, 2011 7:00 pm
State: WA
Location: Dampier - WA

Re: Re-trim - help/opinions

Post by Woody01 »

stinky - if i do venture away from the standard design it wont be too far or too crazy. just want it to be clean, simple, and classy (how i plan to build every aspect of the car) no crazy flames or tribal designs here haha
i cant really picture that combo you suggested in my head - i think im sold on the darker green, so thats a good spot to start i think. will take that to the trimmer, and throw some ideas around.

cal - i think i will be going vinyl all over - its not a daily driver, and ive had a few vinyl bench seats before and they dont bother me too much sliding all over the shop haha.
Woody - UMX-282
FB EK Club WA
Foundation Member # 138
OldMan's Lacky
Posts: 232
Joined: Wed May 11, 2011 8:35 am
State: NOT ENTERED
Location: The Capital

Re: Re-trim - help/opinions

Post by OldMan's Lacky »

Woody01 wrote:that is one clean interior, i like the dark green against the lighter green - onto a winner there. thanks for posting that Cal, wouldn't happen to have anymore pics of it, or the whole car?
Hope Tim doesn't mind but here's a few more from the Grey Pride run earlier this year:

Image

Image

Image

Image

Image
Woody01
Posts: 321
Joined: Thu May 12, 2011 7:00 pm
State: WA
Location: Dampier - WA

Re: Re-trim - help/opinions

Post by Woody01 »

thanks for the pics mate - thats one nice interior - i think im sold.

will take the pics to the trimmer and see what we can come up with. 8) 8)
Woody - UMX-282
FB EK Club WA
Foundation Member # 138
Post Reply