Engineers in SA

If it doesn't fit below then post here and see if another FB EK fanatic can help you out.

Moderators: reidy, Blacky

pezwa83
Posts: 6
Joined: Tue Jan 17, 2012 12:41 pm
State: NOT ENTERED
Location: Adelaide

Re: Engineers in SA

Post by pezwa83 »

I'm also looking for engineers in SA....it seems Perth has a list on their website with phone numbers and all but nothing for SA's website.......I know for sure I'm gonna need one (complete driveline change, new trans tunnel, steering change etc)
Any one got somewhere to start ??
ek61
Posts: 1419
Joined: Sun May 29, 2005 10:09 pm
State: NOT ENTERED
Location: FB-EK HOLDEN CAR CLUB OF SA INC

Re: Engineers in SA

Post by ek61 »

http://www.rtsengineering.com.au/

this is the guy to use Rory Thompson
"THE JOURNEY OF A THOUSAND MILES BEGINS WITH A BROKEN FAN BELT AND A FLAT TYRE"
***just cruise***
pezwa83
Posts: 6
Joined: Tue Jan 17, 2012 12:41 pm
State: NOT ENTERED
Location: Adelaide

Re: Engineers in SA

Post by pezwa83 »

http://www.transport.sa.gov.au/pdfs/per ... ineers.PDF


I found this today.......hope this helps any one elso looking......
choppedfan
Posts: 532
Joined: Sun Jul 10, 2011 6:15 pm
State: NOT ENTERED
Location: Riverina

Re: Engineers in SA

Post by choppedfan »

ek61 wrote:and as for insurance
i had my ek insured with shannons for 20k told them it was fuel injected 202 and not approved
they said thats ok we are not cops and would still honour the insurance if anything ever happened :D :D
Have to agree with the others, these insurance sales reps will say anything to sign you up :evil: :evil: If I was you ring again to confirm what they told you then ask for an email address so you can email the question so you'll have it in writting

Bet you don't get them to commit in writting :wink:

Mick 8)
ek61
Posts: 1419
Joined: Sun May 29, 2005 10:09 pm
State: NOT ENTERED
Location: FB-EK HOLDEN CAR CLUB OF SA INC

Re: Engineers in SA

Post by ek61 »

its now a grey motor again :D
"THE JOURNEY OF A THOUSAND MILES BEGINS WITH A BROKEN FAN BELT AND A FLAT TYRE"
***just cruise***
choppedfan
Posts: 532
Joined: Sun Jul 10, 2011 6:15 pm
State: NOT ENTERED
Location: Riverina

Re: Engineers in SA

Post by choppedfan »

ek61 wrote:its now a grey motor again :D
Welcome back :thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup: :lol:

Mick 8)
Shaggy
Posts: 38
Joined: Thu Jan 29, 2009 7:30 pm
State: NOT ENTERED
Location: Adelaide

Re: Engineers in SA

Post by Shaggy »

Hi guys,

I see the last conversation on this was a few years ago and I was just wondering where the fish flops now days in regards to SA's laws and going through Regency.
I'm thinking of putting a red motor, Hr disc front with rack and pinion, Hr drum rear, auto trans, lowered springs and retractable seat belts into an FB? Does it need to be engineered and does Regency check the whole car over while it over the pits? Any advice would be great.
User avatar
stinky
Posts: 894
Joined: Tue Oct 11, 2005 10:06 pm
State: SA
Location: Willaston, South Australia

Re: Engineers in SA

Post by stinky »

My FE has been on the road for around 10 years and has most of the mods you mention, back then I didn't need an engineer, best to call Regency though to be sure.
You'll need to fill out a application to modify form anyway to do the mods legally.
Shaggy
Posts: 38
Joined: Thu Jan 29, 2009 7:30 pm
State: NOT ENTERED
Location: Adelaide

Re: Engineers in SA

Post by Shaggy »

Thanks Stinky, I will get that form and do it all legal as I don't want to void my insurance if something goes wrong.
Post Reply