Includes shock absorbers, springs and steering linkages.
Moderators: reidy , Blacky
Dakam
Posts: 1011 Joined: Tue Jan 13, 2009 5:23 pm
State: NOT ENTERED
Location: Cranbourne, Victoria
Post
by Dakam » Sat Jan 29, 2011 11:31 pm
Hi all, just ripped the steering wheel off the FB to fix the indicator which had snapped at the stalk.
Devilrod in all of his kindness gave me a spare to replace it with. Just got home and pulled off the wheel and then realised it aint a BLOODY FB or EK steering column.
If anyone know what its from can you please inform me so I can try and get the appropriate bits.
Here are the pics....
Dave.
I'd rather drive something made of metal, not plastic!
Dakam
Posts: 1011 Joined: Tue Jan 13, 2009 5:23 pm
State: NOT ENTERED
Location: Cranbourne, Victoria
Post
by Dakam » Sat Jan 29, 2011 11:53 pm
Just been hunting and its from EJ to HR.
Dave.
I'd rather drive something made of metal, not plastic!
FATBOY
Posts: 506 Joined: Wed Jul 06, 2005 7:50 pm
State: NOT ENTERED
Location: BATEMANS BAY
Post
by FATBOY » Sun Jan 30, 2011 8:17 am
the paret you need are 27.95 on ebay have fitted a few to my cars
regards fatboy
Devilrod
Posts: 7394 Joined: Fri Apr 30, 2004 12:55 pm
State: VIC
Location: Beaconsfield, Vic
Post
by Devilrod » Sun Jan 30, 2011 8:44 am
Geez Dave you have no luck!
Your plans to fit the standard wheel later wont quite work. Do you want the whole column?
Dakam
Posts: 1011 Joined: Tue Jan 13, 2009 5:23 pm
State: NOT ENTERED
Location: Cranbourne, Victoria
Post
by Dakam » Sun Jan 30, 2011 9:02 am
Thanks Fatboy, I'm on to it.
Thanks for all your help DR, as soon as I realised it was the wrong column, I knew the wheel wasnt going to fit.
Doesnt matter, dont worry about the column. I'll persavere with what I got for now. Thanks for the offer though.
I'll give back the bits you gave me when I see you next.
Thanks, Dave.
I'd rather drive something made of metal, not plastic!
Devilrod
Posts: 7394 Joined: Fri Apr 30, 2004 12:55 pm
State: VIC
Location: Beaconsfield, Vic
Post
by Devilrod » Sun Jan 30, 2011 9:08 am
No probs offer stands as long as you want.
Dakam
Posts: 1011 Joined: Tue Jan 13, 2009 5:23 pm
State: NOT ENTERED
Location: Cranbourne, Victoria
Post
by Dakam » Sun Jan 30, 2011 9:53 am
Thanks mate. Will probably do it down the track, wanna fix up the wheel first. Then we'll go from there.
Dave.
I'd rather drive something made of metal, not plastic!
fb delivery
Posts: 1702 Joined: Sun Apr 25, 2010 10:17 pm
State: NOT ENTERED
Location: Toowoomba
Post
by fb delivery » Sun Jan 30, 2011 8:41 pm
looks like Hd Hr to me
EJ EH has cast outer housing
HD HR has a plastic outer housing
Rob
Dakam
Posts: 1011 Joined: Tue Jan 13, 2009 5:23 pm
State: NOT ENTERED
Location: Cranbourne, Victoria
Post
by Dakam » Sun Jan 30, 2011 10:00 pm
Definatly plastic outer.
Dave.
I'd rather drive something made of metal, not plastic!
Mick
Posts: 4331 Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW
Post
by Mick » Mon Jan 31, 2011 12:56 pm
and gear stick is definately HD/HR but the blinker mechanism is the same from EJ-HR
sometimes yor just better off shitting in yor hands and clapping
W.S.C.C.A
Woodstock chapter
Dakam
Posts: 1011 Joined: Tue Jan 13, 2009 5:23 pm
State: NOT ENTERED
Location: Cranbourne, Victoria
Post
by Dakam » Mon Jan 31, 2011 5:30 pm
Part ordered, thanks AGAIN to DR for saving me the drive out to Bayswater. Just ordered it from Rare Spares through Autobarn. Should have it tomorrow.
Dave.
I'd rather drive something made of metal, not plastic!