You may need to change the arms , if look at them from the front you'll see that the steering rack and the wishbones are not running parallel and this will cause bumpsteer.DOLLER wrote:Ive just put my HR front end together and have noticed that the steering arms when on full lock will hit bottom of the wishbone.
Im running a front mount torana rack with HR steering arms onto HQ stubs.
When I put the front end in will the weight of the car "level" out the lower wish bones enough so that the steering arms dont hit?? Sorry if this has been covered somewhere else, but I couldn't find anything.
steering arms.
-
FCOV6
- Posts: 177
- Joined: Sat Oct 25, 2008 10:04 pm
- State: NOT ENTERED
- Location: Melbourne, Australia
Re: steering arms.
-
DOLLER
- Posts: 300
- Joined: Tue Dec 08, 2009 1:17 pm
- State: NOT ENTERED
- Location: Shepparton, VICTORIA
Re: steering arms.
Hmm I'll have to have a look and post some pics and see what you blokes think.
Run what ya brung and hope it's enough
-
FCOV6
- Posts: 177
- Joined: Sat Oct 25, 2008 10:04 pm
- State: NOT ENTERED
- Location: Melbourne, Australia
Re: steering arms.
You might be ok, i know with HR stubs and HR arms the steering Ackerman angle is incorrect but since the HQ stubs will position the arms differently they might work on.DOLLER wrote:Hmm I'll have to have a look and post some pics and see what you blokes think.