Nigel's FB
Nigel's FB
Our club treasurer is flat out getting his FB back together so he can bring it to the Nationals, I gave him a hand yesterday to get a few bits back in it- bloody windscreens are a nightmare, can't get them to sit in properly, might have to get some new rubbers from Betta Rubber, these Rare Spares ones aren't even close......
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: Nigel's FB
Sent from my iPhone using Tapatalk
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: Nigel's FB
Sent from my iPhone using Tapatalk
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: Nigel's FB
Thats fantastic Nigel your sedan is looking great.
I'm dreading the windscreen thing when my Ute comes back from everything I've read on the forum lately it is a real battle.
Keep at it Nigel Nationals are looking real for you.
Regards
Neil
I'm dreading the windscreen thing when my Ute comes back from everything I've read on the forum lately it is a real battle.
Keep at it Nigel Nationals are looking real for you.
Regards
Neil
Member of WA FB/EK Car Club
Frankenstein EK V6 Ute
FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
Frankenstein EK V6 Ute
FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
Re: Nigel's FB
Awesome detailing there chaps. Can’t beat red with a white flash ones. Specially with the colour coded fan blade.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: Nigel's FB
Blacky wrote: ↑Thu Apr 26, 2018 10:07 am Our club treasurer is flat out getting his FB back together so he can bring it to the Nationals, I gave him a hand yesterday to get a few bits back in it- bloody windscreens are a nightmare, can't get them to sit in properly, might have to get some new rubbers from Betta Rubber, these Rare Spares ones aren't even close......
Sent from my iPhone using Tapatalk
Good to see a few WA boys trying to pull there fingers out (yes im including myself there )
Good job Nigel, keep it up mate
Cheers
Nathan
FB/EK Holden Car Club of W.A. Inc
Foundation Member
Foundation Member
Re: Nigel's FB
Still a few long nights there, the trim will chew up some time.
I did this sort of stuff years ago, Summernats 3 days away, finished the at the time ute and was giving it a test run when the trusty grey become not so trusty ! 2 days to go borrowed a mates red motor, welded in some engine mounts and away we went again, this time overheating ! 1 day to go new radiator and support panel and that problem was fixed. So we made it but in all the hurry I forgot the gearbox support bush in the crank so after 4 days terrorising Canberra the trusty 3 speed got really loud and eventually died !
Nice colour as well I agree, good luck hope you can make it.
Regards Greg
I did this sort of stuff years ago, Summernats 3 days away, finished the at the time ute and was giving it a test run when the trusty grey become not so trusty ! 2 days to go borrowed a mates red motor, welded in some engine mounts and away we went again, this time overheating ! 1 day to go new radiator and support panel and that problem was fixed. So we made it but in all the hurry I forgot the gearbox support bush in the crank so after 4 days terrorising Canberra the trusty 3 speed got really loud and eventually died !
Nice colour as well I agree, good luck hope you can make it.
Regards Greg
So many cars so little time!
Re: Nigel's FB
Good job Nigel. Hopefully you will be in it this Nationals.
Re: Nigel's FB
Got all the wiring sorted today , fuel tank and lines etc are in , brakes are ready to be bled - not far off firing it up
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
-
- Posts: 1898
- Joined: Wed May 16, 2012 10:18 pm
- State: SA
- Location: South Australia
Re: Nigel's FB
Called in the big guns to smash it out.........
A day in the shed beats a day at work!
Re: Nigel's FB
no - just Nigel , Mick and me
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: Nigel's FB
Well done guys. Good teamwork, like the Eagles just showed in the 2nd quarter against the Dockers
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: Nigel's FB
Great stuff guys, really good to see you guys pulling together to get Nigels car to the Nationals, it is what the scene is all about isn't it.
Regards
Neil
Regards
Neil
Member of WA FB/EK Car Club
Frankenstein EK V6 Ute
FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
Frankenstein EK V6 Ute
FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
- WesternWagon
- Posts: 945
- Joined: Wed Jul 07, 2010 6:33 pm
- State: WA
- Location: Mandura WA
Re: Nigel's FB
Looking awesome lads can’t wait to see it in the flesh
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Member : Holden Car Club WA.
:ASRF Member
: Secretary FB/EK holden Club of WA.
:ASRF Member
: Secretary FB/EK holden Club of WA.
Re: Nigel's FB
got brakes and clutch bled up today , also replaced the dodgy ignition switch with a proper one , it now starts off the key , has steering and gears
Screens are meant to be going in wednesday and Nigel is busy polishing stainless so we can get that on before the rest of the guts in the doors goes in
Screens are meant to be going in wednesday and Nigel is busy polishing stainless so we can get that on before the rest of the guts in the doors goes in
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.