Blackys Bench Bucket bracket bodging blatherings
Re: Blackys Bench Bucket bracket bodging blatherings
also Blacky any idea what year BT50 it's out of
thanks
thanks
sometimes yor just better off shitting in yor hands and clapping
W.S.C.C.A
Woodstock chapter
W.S.C.C.A
Woodstock chapter
Re: Blackys Bench Bucket bracket bodging blatherings
Around a 2010 mate
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: Blackys Bench Bucket bracket bodging blatherings
[album][/album]
Hey Mick the guy from Nambucca with the 2door ek has a Rodeo one in his from memory
EK JAY SINCE 1990
Re: Blackys Bench Bucket bracket bodging blatherings
yeah i've used Rodeo before they just didn't seem to flip forward very much, i could get into the back seat of the other 2 door with it though
thanks Blacky
sometimes yor just better off shitting in yor hands and clapping
W.S.C.C.A
Woodstock chapter
W.S.C.C.A
Woodstock chapter
Re: Blackys Bench Bucket bracket bodging blatherings
got one it's nearly in just gotta make some plates and drill some holes
sometimes yor just better off shitting in yor hands and clapping
W.S.C.C.A
Woodstock chapter
W.S.C.C.A
Woodstock chapter
Re: Blackys Bench Bucket bracket bodging blatherings
Sweet mate , glad it worked for ya
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: Blackys Bench Bucket bracket bodging blatherings
Very nice Blacky looks comfy- finished centre console looks great too
Re: Blackys Bench Bucket bracket bodging blatherings
funny it's out of an '05 bravo but is identical
sometimes yor just better off shitting in yor hands and clapping
W.S.C.C.A
Woodstock chapter
W.S.C.C.A
Woodstock chapter
Re: Blackys Bench Bucket bracket bodging blatherings
6 hours in the seat today much better than the buckets i had in it
sometimes yor just better off shitting in yor hands and clapping
W.S.C.C.A
Woodstock chapter
W.S.C.C.A
Woodstock chapter
Re: Blackys Bench Bucket bracket bodging blatherings
Good to hear mate , I have only done a 30 minute drive in mine so far
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: Blackys Bench Bucket bracket bodging blatherings
6 hours back home today, still just as happy with it
sometimes yor just better off shitting in yor hands and clapping
W.S.C.C.A
Woodstock chapter
W.S.C.C.A
Woodstock chapter
Re: Blackys Bench Bucket bracket bodging blatherings
Give us a look ??
Greg
Greg
So many cars so little time!
Re: Blackys Bench Bucket bracket bodging blatherings
Bump
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: Blackys Bench Bucket bracket bodging blatherings
I scored another BT-50 seat for the rattler so it’s time to make another set of brackets- the one in the ute sits a little high so I wanted to set it as low as I can get it . Originally I was going to do what I did in the ute and chop a set of original seat mounts up I figured I could do it without chopping up the original brackets.
Ute setup -
Started by removing the factory brackets from the stock seat and comparing the two
It needs to sit further back than the ute as well so I started by making a plate the same size as the original and spacing it up with a bit of 25x25 SHS
Sent from my iPhone using Tapatalk
Ute setup -
Started by removing the factory brackets from the stock seat and comparing the two
It needs to sit further back than the ute as well so I started by making a plate the same size as the original and spacing it up with a bit of 25x25 SHS
Sent from my iPhone using Tapatalk
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: Blackys Bench Bucket bracket bodging blatherings
Then bolted it to the seat and made sure it lines up with the marks on the floor where the original ones sat and tacked it together
Tossed it in the car, bolted the back in and set the height at the front
Was going to make a similar arrangement as the factory setup that slid into the saddles bolted to the floor but that was too fiddly so I just cut some plates that picked up the bolt holes and made SHS spacers again - dunno if the engineer will be happy with that but will find out one day if and when I get this thing engineered
Zapped it all together and it works like a bought one
Painted them up and they are hanging in the shed waiting for me to stop buggerising around on the internet and go and install them
Sent from my iPhone using Tapatalk
Tossed it in the car, bolted the back in and set the height at the front
Was going to make a similar arrangement as the factory setup that slid into the saddles bolted to the floor but that was too fiddly so I just cut some plates that picked up the bolt holes and made SHS spacers again - dunno if the engineer will be happy with that but will find out one day if and when I get this thing engineered
Zapped it all together and it works like a bought one
Painted them up and they are hanging in the shed waiting for me to stop buggerising around on the internet and go and install them
Sent from my iPhone using Tapatalk
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.