steering box rebuild
Posted: Sun Aug 09, 2009 11:00 am
does anyone hav any pictures or how to's on rebuilding a steering box. i clearly hav put mine back together the wrong way . thanx
fbekholden.com
FB-EK Holden Car Clubs of Australia
https://www.fbekholden.com/forum/
steering box rebuild
Page 1 of 1
Posted: Mon Aug 10, 2009 10:30 pm
ok so no one has any tips so i'll give you one if you see a grey and white wagon swerving all over the road get the hell out of its way
Posted: Tue Aug 11, 2009 10:44 am
have a look in the gregorys manual, i have never done it but if i was going to i would refer to the manual first
Posted: Tue Aug 11, 2009 10:52 am
I've only ever done one years ago whist an apprentice at Tech College.
Never bothered fixing them because the old holdens were everywhere then ( early '80's ) and we just grabbed a box/column from a wreck at the dump or someones paddock and fitted it and way we went again.
Your best friend at this point (as FB Cruzin said ) is a Gregory's workshop manual ( to order one ask for Gregory's number 67 for FX to HR ) and there is a section in it with explanation and some pics that may help you to get on with putting it back together properly.
Never bothered fixing them because the old holdens were everywhere then ( early '80's ) and we just grabbed a box/column from a wreck at the dump or someones paddock and fitted it and way we went again.
Your best friend at this point (as FB Cruzin said ) is a Gregory's workshop manual ( to order one ask for Gregory's number 67 for FX to HR ) and there is a section in it with explanation and some pics that may help you to get on with putting it back together properly.