fbekholden.com

Posted: **Thu Jul 30, 2009 9:02 pm**

Hi guys i am thinking about a new head for the old girl. a red six
any help would be good

Posted: **Thu Jul 30, 2009 9:27 pm**

i got a good injected black motor out of my ek loom and all
would fit in there ok

Posted: **Thu Jul 30, 2009 9:32 pm**

no thanks Dave have spent to much money on this one
thinking of some new pistons and rings for this one and hopefully a head

Posted: **Fri Jul 31, 2009 9:08 am**

By the time you pay for new pistons,rings,rebore and buy a Yella Terra head and have it cleaned up fit for use, you'd probably have spent more than dave is asking for his motor??

Just a suggestion

Posted: **Fri Jul 31, 2009 7:21 pm**

good point FB MAD but i have alot of new parts for this one and i was thinking of just a freshen up. i also dont like the look of them i like the carby set up better

some one in sa wouldn't have a good running 179 or 186 would they

Posted: **Fri Jul 31, 2009 9:28 pm**

there's a good sounding bottom end on ebay at the moment in SA

Posted: **Sat Aug 01, 2009 8:30 pm**

thanks ratbox i will try and find it

cant seem to find it ratbox

Posted: **Sat Aug 01, 2009 11:28 pm**

http://cgi.ebay.com.au/FE-FC-FB-EK-EH-H ... 0475141821

Posted: **Sun Aug 02, 2009 8:06 pm**

thanks blue ute

dose a 202 head fit on a 179 /186 i no it will fit but what about compression

any help

Posted: **Sun Aug 02, 2009 9:06 pm**

202 head has same combustion chamber volume as 179/186 head.

Compression ratio will be variable as the head may have been shaved at some time in its history ( very likely with a Yella Terror head ) which will raise the ratio from that of a standard spec head.

Only way to exactly determine comp ratio is to have the head chamber volume CC'd.

Posted: **Mon Aug 03, 2009 9:17 pm**

thanks FB MAD

Posted: **Tue Aug 04, 2009 11:00 am**

Hey Rick,
I got a 202 yella terra head thats been converted for 186(Valve guides plates) I'll chuck it in with Matts(SCK) Hotrod project that i'll be storing for a couple of weeks. A bottle shop voucher and its all yours! Will need to be cleaned up and needs rockers. I've never used it and don't know its history.
Cheers Theo Z........................

Posted: **Tue Aug 04, 2009 8:49 pm**

thanks mate sounds like a plan

i will send a pm