fbekholden.com

Posted: **Mon Jun 01, 2009 5:30 pm**

Hi All, is the vn/vp etc bolt pattern for the gearbox the same as chev?? Cheers Mark

Posted: **Mon Jun 01, 2009 8:55 pm**

It is Mark , Turbo pattern

Posted: **Mon Jun 01, 2009 9:15 pm**

Thanks Mate

Posted: **Mon Jun 01, 2009 10:57 pm**

make sure you get a VN/VP box as the others are a pain in the bum

Posted: **Mon Jun 01, 2009 11:01 pm**

Yeah thats what im chasing.Was told that they are heaps easier than the later model one's.cheers mark

Posted: **Sat Jun 13, 2009 10:37 pm**

minifbvan wrote:Yeah thats what im chasing.Was told that they are heaps easier than the later model one's.cheers mark

They are Mark. I transplanted a VN SS 5lt and Turbo 700 into my 80 series Landcruiser and had no probs getting the trans to lock up. I used a speed sensor from Mark's 4WD Adapters, it has dip switches so you can select the rpm that the box changes gears which is very handy. I got mine to lock up in top gear at 60 kph in the cruiser. Gear changes are also very smooth in the 700's.

Posted: **Sun Jun 14, 2009 12:49 pm**

Hi All, I scored a vq caprice for my doner car...Te only ting its too good to wreck.. But it wont stop me

Posted: **Sun Jun 14, 2009 2:26 pm**

If its to good to wreck, Graft all your FB bits onto it....Its been done before

fbekholden.com

vn v8 gearbox pattern

vn v8 gearbox pattern