Page 1 of 1

Ohh where to get a wheel alignment in Vic...

Posted: Mon Oct 24, 2005 4:37 pm
by tikEK
HELP!

Am in need of a place to get the EK wheel alignment done in Vic.
Any help appreciated, near South Melbourne would be a plus...
cheers,
Simon

Posted: Mon Oct 24, 2005 9:58 pm
by Devilrod
Not sure of anywhere round that way, but most tyre places will do them or a good mechanics should be able to cater for it. Try Bob, Ultra Tune, Bridgstone, Tyrpower etc.... (maybe ask on the HAMB some of the guys are more inner Melbourne knowledgeable than I am).

Posted: Tue Oct 25, 2005 8:16 am
by tikEK
Apparently most tyre joints like you mention, don't keep the old tools needed to do an alignment - I've already tried a bunch... that and the newer machines don't have the required settings for what the EKs need....

So someonw, anyone.....

Posted: Tue Oct 25, 2005 8:28 am
by Naughty
Try these guys below:

http://www.hrpartsandstuff.net/

They work on old holdens

Cheers
Robbo

Posted: Tue Oct 25, 2005 9:20 am
by Devilrod
tikEK wrote:Apparently most tyre joints like you mention, don't keep the old tools needed to do an alignment - I've already tried a bunch... that and the newer machines don't have the required settings for what the EKs need....

So someonw, anyone.....
There is or used to be a place in Seaford that does trucks and really low and old cars, but I can't remember the name. Will try and find it for you if you want....

Posted: Tue Oct 25, 2005 10:05 am
by tikEK
any help is appreciated.....

cheers all

Posted: Wed Oct 26, 2005 11:55 pm
by Nasco Hunter
The place in Seaford to do your front end is Hendersons. They are just off Wells rd and do a great job. Have had all my earlies done their and very happy with the job.
Cheers Tony G.

Posted: Thu Oct 27, 2005 7:10 am
by tikEK
thanks Tony.

Unless i find anything closer, it might be my last point of call.
cheers

Posted: Thu Oct 27, 2005 9:11 am
by Devilrod
Nasco Hunter wrote:The place in Seaford to do your front end is Hendersons. They are just off Wells rd and do a great job. Have had all my earlies done their and very happy with the job.
Cheers Tony G.
That's them! Couldn't remeber the name, thanks Tony... :D