Page 1 of 1

Engine Bay Electric Wiring

Posted: Sun Apr 17, 2022 3:20 pm
by Apex
G'day all
Hoping at least someone can help me as electrics was never my best subject.
I've discovered that after my car was rewired there was one original wire left and that runs from the negative (-) coil to the outside of the distributor body. On a wiring diagram I found it's shown as '16 GA Black'. Does this sound right, and what would I ask for when I go to Repco or wherever I can buy a metre of wire these days? I'd be very grateful for any help.
Thanks and regards Apex. :problem: :econfused:

Re: Engine Bay Electric Wiring

Posted: Sun Apr 17, 2022 5:24 pm
by In the Shed
Hi Apex

Yes that wire runs from coil to dizzy. Wire is shown as 14/0.012 16GA in manual. That translates to 14 stranded wire each strand being 0.012 inches or 16 gauge.

I would just grab a 5metre roll of 10 amp cable in black from your local auto store. That should do it.

Stephen

Re: Engine Bay Electric Wiring

Posted: Mon Apr 18, 2022 3:18 pm
by Apex
Hullo Stephen
Thanks very much for your reply, and for the explanation of what the various numbers mean. Yes, I'll get some 10-amp cable.
Regards
Apex