wipr arm length
Posted: Tue Dec 31, 2019 12:15 pm
Can someone help me with the correct length of the wiper arms for the FB EK please? Cheers, Fraze
Sent from my SM-A705YN using Tapatalk
Page 1 of 1
Re: wipr arm length
Posted: Tue Dec 31, 2019 2:45 pm
Where is my wiper stash??
Sent from my SM-A705YN using Tapatalk
Sent from my SM-A705YN using Tapatalk
Re: wipr arm length
Posted: Wed Jan 01, 2020 9:08 am
Thanks for that Clay, however it is the arm length I am after, not the blade as shown. Have a great New Year! Cheers, Fraze
Re: wipr arm length
Posted: Wed Jan 01, 2020 2:05 pm
Can’t find my arms fraze sorry. Happy New Year mate 
FB ute fixer upper, EK van on rotisserie
FB ute fixer upper, EK van on rotisserie
Re: wipr arm length
Posted: Wed Jan 01, 2020 5:54 pm
Hey Fraze
This what you are after? These are off the EK Ute Clay and I scrounged bits from. Top arm is 408mm and bottom 480mm (straight line), both measurements pin/pivot to pin. Hope this helps and Clay finds his arms to get that Ute painted!
Regards
Stephen
This what you are after? These are off the EK Ute Clay and I scrounged bits from. Top arm is 408mm and bottom 480mm (straight line), both measurements pin/pivot to pin. Hope this helps and Clay finds his arms to get that Ute painted!
Regards
Stephen
Re: wipr arm length
Posted: Thu Jan 02, 2020 7:52 am
Thanks for all the tries guys. What I am after is the length of the arm that holds the blade. (The blade being the part in Clay's photo). This arm pushes onto the spindle which is just below the windscreen. My problem is that my car has two different length of arm and i am trying to establish which is the correct length. Thanks, Fraze
Re: wipr arm length
Posted: Thu Jan 02, 2020 12:13 pm
Exactly 11 inches from the end of the wiper arm to the centre of the hinge pin at the spindle endfraze wrote: Thu Jan 02, 2020 7:52 am Thanks for all the tries guys. What I am after is the length of the arm that holds the blade. (The blade being the part in Clay's photo). This arm pushes onto the spindle which is just below the windscreen. My problem is that my car has two different length of arm and i am trying to establish which is the correct length. Thanks, Fraze
Re: wipr arm length
Posted: Thu Jan 02, 2020 12:16 pm
Like this 
Sent from my SM-A705YN using Tapatalk
Sent from my SM-A705YN using Tapatalk
Re: wipr arm length
Posted: Thu Jan 02, 2020 6:35 pm
there are different parts numbers for fb and ek
Re: wipr arm length
Posted: Fri Jan 03, 2020 7:19 am
Thanks Blacky, you nailed it! Thats the dimension I was looking for. Cheers, Fraze