Idler Arm Cactus?
Posted: Fri Nov 14, 2014 11:18 am
G Day FBEKer's
The original measurement on the idler was too short and was screwed all the way till it bottomed / tightened on the bush. So I loosened it, screwed it out to 2 3/16 " as the good book says, and there is play. I am assuming this is not good and need a replacement?
Have a good w/end
The original measurement on the idler was too short and was screwed all the way till it bottomed / tightened on the bush. So I loosened it, screwed it out to 2 3/16 " as the good book says, and there is play. I am assuming this is not good and need a replacement?
Have a good w/end