Page 1 of 1
Rear engine mounts (Hydra-Matic)
Posted: Tue Jul 08, 2014 11:32 am
by Dean&Jana
I'm having trouble finding a supplier for rear engine mounts for a Hydra-Matic grey motor original set-up. Rare Spares gave me the flick. Any ideas?
Re: Rear engine mounts (Hydra-Matic)
Posted: Tue Jul 08, 2014 2:33 pm
by Trev
Holden EK Auto Engine Mount Brackets Hydramatic Trimatic FE FC FB 7417859-60 New
gmhnasco (946)
100.0% positive feedback
Member since2010
Location:AUSTRALIA
Roger is reproducing them.
Re: Rear engine mounts (Hydra-Matic)
Posted: Tue Jul 08, 2014 2:34 pm
by Trev
On eBay.
Re: Rear engine mounts (Hydra-Matic)
Posted: Tue Jul 08, 2014 5:09 pm
by Dean&Jana
Thanks Trev, but I'm chasing the rubber/steel mounts themselves, not the brackets. I'm of the understanding that the Auto and Manual rear engine mounts are different. Although, to me, the rear mounts pictured on ebay and rare spares for manuals look very similar to the hydro ones I have removed.
Re: Rear engine mounts (Hydra-Matic)
Posted: Tue Jul 08, 2014 5:28 pm
by Dean&Jana
Just looked up the Master Parts Catalogue and it does have Hydros with different rear mounts "insulator assembly' EK (H/T) 7417858, FE, FC, FB, EK (S/T) 4709885. So answered my own question (Tim was right as normal). Looks like it might be swap meets to find them.
Re: Rear engine mounts (Hydra-Matic)
Posted: Wed Jul 09, 2014 5:33 pm
by Les
From what I can find out the manual one will fit the auto
http://www.rarespares.net.au/rarespares ... uct=EM1013
Re: Rear engine mounts (Hydra-Matic)
Posted: Wed Jul 09, 2014 7:06 pm
by Dean&Jana
thanks Les, they do look like hydro ones. I have some time up my sleeve as I'm chasing a drive plate/damper so it could be a while.
Re: Rear engine mounts (Hydra-Matic)
Posted: Tue Jul 15, 2014 8:35 pm
by Les
SunnyTim wrote:Deano EK manual wont fit. EK hydro same as all EJ ones
Sunny Tim
They may well fit but the are a different part number, if you are talking from experience then you my be correct I was using the GMH history which is not always correct.
If the EJ one fits then I will change our computer to reflect this.
Dean if you want to try one let me know your name and address and I will send you one free of charge if you fit it and let me know if it fits or not
Les
Re: Rear engine mounts (Hydra-Matic)
Posted: Tue Jul 15, 2014 9:16 pm
by Blacky
Les wrote:SunnyTim wrote:Deano EK manual wont fit. EK hydro same as all EJ ones
Sunny Tim
They may well fit but the are a different part number, if you are talking from experience then you my be correct I was using the GMH history which is not always correct.
If the EJ one fits then I will change our computer to reflect this.
Dean if you want to try one let me know your name and address and I will send you one free of charge if you fit it and let me know if it fits or not
Les
That's mighty decent of you Les
Re: Rear engine mounts (Hydra-Matic)
Posted: Tue Jul 15, 2014 10:45 pm
by Devilrod
Blacky wrote:Les wrote:SunnyTim wrote:Deano EK manual wont fit. EK hydro same as all EJ ones
Sunny Tim
They may well fit but the are a different part number, if you are talking from experience then you my be correct I was using the GMH history which is not always correct.
If the EJ one fits then I will change our computer to reflect this.
Dean if you want to try one let me know your name and address and I will send you one free of charge if you fit it and let me know if it fits or not
Les
That's mighty decent of you Les
X2