Page 1 of 1
Mooneyes Steering Wheels to Stock EK column - How To....?
Posted: Mon Jun 16, 2014 9:02 pm
by Mai Ki-Ki
Hi, I want a three spoke (slotted) chrome / black vinyl wheel from Mooneyes, for my EK, have worked out a way to adapt the wheel to the column using the remnants of a stock EK Wheel but has anyone fitted one using the adapters (Saas or otherwise)......?
The moon wheel has a 3' dish to it so will be similar to the stock dish, and I'd rather not have it stick out further due to the adapter.
Cheers Maiki
Re: Mooneyes Steering Wheels to Stock EK column - How To....
Posted: Mon Jun 16, 2014 10:25 pm
by NoMAD
would be interested to see what you have done / come up with mate
cheers
Nathan
Re: Mooneyes Steering Wheels to Stock EK column - How To....
Posted: Mon Jun 16, 2014 11:14 pm
by Devilrod
Is it worth getting a saas deep dish boss kit, then have it drilled to mount the moon wheel?
Or is the spline similar to an early chev?
Re: Mooneyes Steering Wheels to Stock EK column - How To....
Posted: Tue Jun 17, 2014 3:01 pm
by Mai Ki-Ki
All the Saas kits seem to be 2" or more deep.
I was looking at removing the splined/metal section in the centre of the stock wheel and mating it to the Mooneyes wheel....either drilling/tapping the stock centre or the wheel centre.
If i had a $*#@ wheel I'd try it.....but even shit ones seem to be worth $ on eBay!
Maiki
Re: Mooneyes Steering Wheels to Stock EK column - How To....
Posted: Tue Jun 17, 2014 7:31 pm
by Thommo
I used a SAAS adapter, but I drilled the six steering wheel screw holes as deep as possible without breaking through.
Threaded the holes to the bottom, then I parted off all the excess height in a lathe, leaving me just a thin adapter.

Re: Mooneyes Steering Wheels to Stock EK column - How To....
Posted: Sat Jun 21, 2014 7:41 pm
by Mai Ki-Ki
Thommo, That looks pretty neat...nice idea!
