Page 1 of 1
13inch dragways on fb drum brake front end.
Posted: Sat Apr 28, 2007 3:22 pm
by karens fb
Hi all,ive got a set of dragways 13x7
they were of a fc with hr disc's .I put them on my fb wagon and the front rim rubs on the steering arm.Can i buy a spacer for the early holden rims?? to bring them out so they dont rub?? cheers mark
Posted: Sat Apr 28, 2007 5:00 pm
by aussiebogan_no1
G'day Mate,
When i got my wheels i had 30mm spacers made up to put the rims closer to the guards, the cost me $85 each. I dont know where they where made the guys at the tyre place organised it all
Regards
Richard
Posted: Sat Apr 28, 2007 5:03 pm
by Thommo
Gday Mark
Go to E-Bay, Search 'Spacer' in 'Cars,Bikes&Boats'
A range of them will come up for you.
Mostly universal fit in different thicknesses.
You should experiment with washers on the studs first,
to find the 'minimum' thickness required(please dont drive it like this)
Just check for clearance.
Also check that you have enough wheel stud length.
Cheers Jeff
Posted: Sun Apr 29, 2007 2:32 pm
by karens fb
Thanks guys i grabbed a set of ebay to day.thanks for all your help.. cheers mark
Posted: Mon Apr 30, 2007 7:43 pm
by mrs ratbox
another thing you may try if you can find them is LC/LJ torana drum brake front hubs and drums, as you might find with spacers you don't have enough thread left on the wheel studs