Page 1 of 2

Hr disc front end

Posted: Thu Dec 13, 2012 1:32 am
by BS
Getting harder to find I know but chasing one in the Brisbane area.

Have standard front end and diff if any restorer type wants as part trade.

Re: Hr disc front end

Posted: Sat Dec 15, 2012 7:59 pm
by shmeagain
ITS SHMEAGAIN I have two front ends here but im in Lismore

Re: Hr disc front end

Posted: Sun Dec 16, 2012 6:41 pm
by vintageholden
what are they worth these days,,,

Re: Hr disc front end

Posted: Tue Dec 18, 2012 4:52 pm
by fat64jason
i have one here near tiaro.$200 no stubs. :vecctor:

Re: Hr disc front end

Posted: Tue Dec 18, 2012 6:39 pm
by Trev
Nick (Deadsled) has one on his car that he wants to part out and he is in Brisbane.

Re: Hr disc front end

Posted: Thu Dec 27, 2012 2:42 pm
by DeadSled
I have one with EK outrigger and HQ stubs / brakes if you are interested. I'm asking quite a bit for it as i do know what they are worth, rarity, cost of the HQ parts ect. Let me know if you are interested.

Re: Hr disc front end

Posted: Thu Dec 27, 2012 7:44 pm
by MeFB
DeadSled wrote:I have one with EK outrigger and HQ stubs / brakes if you are interested. I'm asking quite a bit for it as i do know what they are worth, rarity, cost of the HQ parts ect. Let me know if you are interested.
Yep, they're currently going for exactly $200 (without stubs) :lol:

:arrow: :D

Re: Hr disc front end

Posted: Thu Dec 27, 2012 7:46 pm
by MeFB
fat64jason wrote:i have one here near tiaro.$200 no stubs. :vecctor:
See :P

Re: Hr disc front end

Posted: Thu Dec 27, 2012 8:30 pm
by DeadSled
Yes but then factor in the 6 hour round trip to go and get that, plus fuel cost (last time i drove close to that it cost me just over $100).

Or you could pay even more and have it couriered.

Or just buy one in Brisbane.

Re: Hr disc front end

Posted: Thu Dec 27, 2012 8:34 pm
by MeFB
How much do you want for yours?

:arrow: :D

Re: Hr disc front end

Posted: Thu Dec 27, 2012 9:40 pm
by BS
I'm all sorted.

Cheers

Re: Hr disc front end

Posted: Thu Dec 27, 2012 9:41 pm
by DeadSled
I've seen two on ebay for $750 and $1100. Mine is complete, with the HQ stubs and brakes. I'd be asking somewhere in the middle of those two prices. Considering like 4 years ago i sold two of them with HR discs for $550 each i think its a fair price.

Re: Hr disc front end

Posted: Fri Dec 28, 2012 8:29 am
by fbvan
The asking price on Ebay is not necessarily what something is worth. People seem to think that if an item is listed at $800 dollars for example then that is what is worth. This is the problem with Ebay as I am sure we have all been to a Swap or whatever and been told. " I can get $800 on Ebay"
So pay what you think is a fair price not what some one has listed on Ebay.
I am sure most of those items that are listed at outrageous prices are not sold. But still used as a benchmark by other sellers.


Brian

Re: Hr disc front end

Posted: Fri Dec 28, 2012 1:17 pm
by vmx-mxr
It would be worth at least $800 if it was a 'prototype' - they're an appreciating asset, going up in value all the time :wink:

Seriously down in Sydney at least, you'll see them advertised for sale from $250 to $750 on Gumtree but factor in doing a reco, and check the underneath if it's really pushed in from jacking. You also need to fork out for the outrigger/front support, new discs etc etc.

If you're going different stubs and stuff just buy a drum ball joint front end (usually much cheaper) and chuck away the drum brakes.

I'd rather buy a shitty, non prototype and spend the difference on getting it sorted. Come to think of it that's what I did !

Dave Mac :)

Re: Hr disc front end

Posted: Fri Dec 28, 2012 3:28 pm
by wot179
I sold one to a member here a little while ago for $250,and it had Torana brakes on it.

I was happy,he was happy.

Life is good. :thumbsup: