Page 1 of 1
Stainless trim
Posted: Mon Aug 13, 2012 5:56 pm
by tez71
Hi does anyone know where these stainless trims go? I got a few assorted trim pieces with the EK and i'm not even sure they are FB/EK. It has the AX profile (triangle). Any help would be appreciated
Thanks
Terry
Re: Stainless trim
Posted: Mon Aug 13, 2012 7:12 pm
by Trev
Looks like they could be part of a flash kit????
Being from QLD it makes sense
.
Re: Stainless trim
Posted: Mon Aug 13, 2012 8:07 pm
by tez71
Thanks for the super fast reply.
These are the rest of the strips I got with the car. The ones in the top of the picture not sure what they are off of, in the middle parts of an FB trim and the bottom look like part of an EK trim. The car also came with a full set of EK trim.
- photo1.JPG (192.53 KiB) Viewed 875 times
Thought the two strips may have been for the rear quarter as they are a similar length, something like this perhaps
- photo2.JPG (156.73 KiB) Viewed 875 times
Re: Stainless trim
Posted: Mon Aug 13, 2012 8:36 pm
by searsy
looks good to me
Re: Stainless trim
Posted: Mon Aug 13, 2012 8:48 pm
by searsy
just had another look could it be the drip mould off an eh
Re: Stainless trim
Posted: Mon Aug 13, 2012 8:49 pm
by searsy
disregard previous post
Re: Stainless trim
Posted: Mon Aug 13, 2012 9:22 pm
by WayneXG95
wouldn't be the back top strips of a station wagon?
Re: Stainless trim
Posted: Mon Aug 13, 2012 9:32 pm
by tez71
Just found this photo, it may be the top strip
Re: Stainless trim
Posted: Tue Aug 14, 2012 4:28 am
by Trev
The top rear one is a cut down FB front flash piece.
Re: Stainless trim
Posted: Tue Aug 14, 2012 7:39 pm
by tez71
Thanks for your help, much appreciated