fbekholden.com

I have a standard EK (61) with just the rubber trim and no steel / stainless trim. Front screen has steel (painted) surround that is body colour.
As I don't want to replace the rear screen just yet (or pull it out) has anyone fitted a rear surround by cutting off the section that usually goes into the rubbers... and then just glue / screw fix in place...?

Cheers Maiki

I just got it after reading it for the 3rd time
Pretty sure you mean cutting the part of the stainless trim, that usually goes inside the rubber and holds it in place, off?
If so I have never heard of it being done before.
Might be easier to put the special rubber in with the stainless fitted the rite way.

SunnyTim wrote:I'm still waiting for Rare Spares to release their reproduction ones....................any minute now surely
Now they have a partneship with GMH never looked back
I have also thought that you could install a key rubber in the groove like the FJ

...or get 'Brian Westlake' out with his trusty Sicaflex gun & aplicator!!!

Scotty.

Yeah, that was the idea.....Might have to get a price on redo-ing the rear screen (new rubber + stainless).

Cheers M

M, pm sent.

Mai Ki-Ki wrote:I have a standard EK (61) with just the rubber trim and no steel / stainless trim. Front screen has steel (painted) surround that is body colour.
As I don't want to replace the rear screen just yet (or pull it out) has anyone fitted a rear surround by cutting off the section that usually goes into the rubbers... and then just glue / screw fix in place...?

Cheers Maiki

pretty sure i know what yor talking about, removing from the stainless the part that inserts into the rubber if so yes i've done it, used srews where they normally would go and a small amount of sikflex to hold it on

harry186 wrote:

Mai Ki-Ki wrote:I have a standard EK (61) with just the rubber trim and no steel / stainless trim. Front screen has steel (painted) surround that is body colour.
As I don't want to replace the rear screen just yet (or pull it out) has anyone fitted a rear surround by cutting off the section that usually goes into the rubbers... and then just glue / screw fix in place...?

Cheers Maiki

pretty sure i know what yor talking about, removing from the stainless the part that inserts into the rubber if so yes i've done it, used srews where they normally would go and a small amount of sikflex to hold it on

AH!

strong metal cutters or grinder/cut-off wheel to remove the stainless part...?

Thanks. M

i used angle grinder useing cut off wheels and grinding make sure you get discs for stainless steel cause you'll chew through them

SunnyTim wrote:

Sputzwagon wrote:

SunnyTim wrote:I'm still waiting for Rare Spares to release their reproduction ones....................any minute now surely
Now they have a partneship with GMH never looked back
I have also thought that you could install a key rubber in the groove like the FJ

...or get 'Brian Westlake' out with his trusty Sicaflex gun & aplicator!!!

Scotty.

Ahh, but which type of Sicaflex I can hear him ask

Whatever type he (borrows ) from his work!