Page 1 of 1
Wanted ASAP
Posted: Sun Sep 12, 2010 5:30 pm
by J
Looking for an HR front end, already done up ready to put in my EK.
Cheers
Jay
Re: Wanted ASAP
Posted: Sun Sep 12, 2010 6:13 pm
by vintageholden
Re: Wanted ASAP
Posted: Mon Sep 13, 2010 10:27 am
by RobinGi
Just to brag a bit
won this on the weekend and will pickup next few days 120klm round trip
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0448217914
I have been looking for months now and was happy to get this one for the ute
As VintageHolden listed the ones on ebay arn't currently too badly priced as long a the bidding dosn't take off, and if you want it ASAP that the going rate for a good front end
Re: Wanted ASAP
Posted: Fri Sep 17, 2010 6:32 pm
by artyfartymarty
J.
i had one with torana disc brakes etc fitted for about $1200ish(i think from memory.... about 6 or so years back). just drove in and drove out, no hassles, totally different car. best modification ever.
Re: Wanted ASAP
Posted: Fri Sep 17, 2010 7:37 pm
by vintageholden
i have a bare one....
no springs or stub axles...neads rebuild
still worth $250 easy...
Re: Wanted ASAP
Posted: Mon Sep 20, 2010 3:17 pm
by Mattso63
artyfartymarty wrote:J.
i had one with torana disc brakes etc fitted for about $1200ish(i think from memory.... about 6 or so years back). just drove in and drove out, no hassles, totally different car. best modification ever.
Hey Marty ... can you remember where you had this work done? Like J, I'm thinking about the drums to disc brake conversion. I've got a spare EK front end (no mods) which I was going to get reconditioned ready for discs, but if there's a place that would do all the work, I'm keen to know about it! Cheers
PS - you have a great looking sedan there
Re: Wanted ASAP
Posted: Mon Sep 20, 2010 8:15 pm
by J
vintageholden wrote:i have a bare one....
no springs or stub axles...neads rebuild
still worth $250 easy...
you selling?
Re: Wanted ASAP
Posted: Tue Sep 21, 2010 1:44 am
by vintageholden
might as well its doing nothing
you interested...
i might have a set of lh torana stubs in the shed
no disks....
try these
http://cgi.ebay.com.au/stub-axles-suit- ... 1c15a07204
Re: Wanted ASAP
Posted: Tue Sep 21, 2010 1:38 pm
by J
definitely interested!
so it has the upper and lower control arms etc?
can you please get a picture of it for me?
Re: Wanted ASAP
Posted: Tue Sep 21, 2010 2:41 pm
by DOLLER
RobinGi- Nice buy, I have a very similar setup.
Those stabiliser bar mounts dont look overly strong though
Are they CRS issue?
Re: Wanted ASAP
Posted: Tue Sep 21, 2010 8:43 pm
by vintageholden
photos in the morning...