Small Block for EK Wagon

Post photos of your pride and joy, or updates on your rebuild!

Moderators: reidy, Blacky

kelleigh54
Posts: 242
Joined: Wed Apr 25, 2007 12:43 am
State: WA
Location: PERTH WESTERN AUSTRALIA
Contact:

Re: Small Block for EK Wagon

Post by kelleigh54 »

Have a complete subframe , give me a shout when you are back home . You can come have a look while taking the top off a coldy or two .
I would rather work on a Morris 1100 than use a computer !!!!!!
User avatar
FireKraka
Posts: 2225
Joined: Fri Jan 24, 2014 11:12 am
State: WA
Location: Serpentine, WA

Re: Small Block for EK Wagon

Post by FireKraka »

Gazza as I said earlier mate I have the one you gave to me and I didn't touch the drivers side so it is there if you want it.

Regards
Neil H
Member of WA FB/EK Car Club
Frankenstein EK V6 Ute
FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
User avatar
mph
Posts: 787
Joined: Fri Oct 19, 2012 12:09 am
State: WA
Location: Perth's North

Re: Small Block for EK Wagon

Post by mph »

Doc Bob wrote:
Anyone know where I can get a new steering column rubber? The one under the dash.
Rare Spares have them Gazza if ya still chasing one. Just fitted one to Bevs EK .......along with 30 others :roll: :lol:
i have a spare one if you want it mate...upon collection you might be passed some spanners to help reassemble my fb though :wink: :lol:
FB-Special
Big block 161 :lol:
Holley sniper EFI.
Vintage air ducted heat and cool.
Ek auto column shift.
Lj diff and reverse lights.
WA FB~EK Car Club Member.
User avatar
Reece42
Posts: 12
Joined: Sun Apr 03, 2016 1:16 pm
State: WA
Location: Armadale

Re: Small Block for EK Wagon

Post by Reece42 »

kelleigh54 wrote:Have a complete subframe , give me a shout when you are back home . You can come have a look while taking the top off a coldy or two .
If he passes up on that subframe, im in need of a complete subframe myself. i'd love to take a gander if your willing to part with it :mrgreen:
kelleigh54
Posts: 242
Joined: Wed Apr 25, 2007 12:43 am
State: WA
Location: PERTH WESTERN AUSTRALIA
Contact:

Re: Small Block for EK Wagon

Post by kelleigh54 »

Not a problem Reece , can you clarify with Gaz that he doesn't need it as he does have first option .
I would rather work on a Morris 1100 than use a computer !!!!!!
User avatar
Reece42
Posts: 12
Joined: Sun Apr 03, 2016 1:16 pm
State: WA
Location: Armadale

Re: Small Block for EK Wagon

Post by Reece42 »

yeah no worries :-) was only if he didn't need it anyway, will see what he says.
User avatar
WesternWagon
Posts: 945
Joined: Wed Jul 07, 2010 6:33 pm
State: WA
Location: Mandura WA

Re: Small Block for EK Wagon

Post by WesternWagon »

kelleigh54 wrote:Not a problem Reece , can you clarify with Gaz that he doesn't need it as he does have first option .
Sorry Lads for not getting back sooner, I will take the sub frame. Im only looking at the drivers side front inner guard section.


I will be back from Melbourne on the 18th

Cheers

Gazza
Member : Holden Car Club WA.
:ASRF Member
: Secretary FB/EK holden Club of WA.
User avatar
Reece42
Posts: 12
Joined: Sun Apr 03, 2016 1:16 pm
State: WA
Location: Armadale

Re: Small Block for EK Wagon

Post by Reece42 »

not a problem, shall continue chasing :ebiggrin:
Blacky
Posts: 12301
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: Small Block for EK Wagon

Post by Blacky »

Gaz I have a subframe with good inners ???
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.


Foundation member #61 of FB/EK Holden club of W.A.
User avatar
Reece42
Posts: 12
Joined: Sun Apr 03, 2016 1:16 pm
State: WA
Location: Armadale

Re: Small Block for EK Wagon

Post by Reece42 »

if any of these frames are still available after Gazza's pick, i'd love to take a look if thats alright, regardless of the condition. any frame is better than no frame :-D
Blacky
Posts: 12301
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: Small Block for EK Wagon

Post by Blacky »

The one I have is rusty but repairable if you are keen enough.
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.


Foundation member #61 of FB/EK Holden club of W.A.
kelleigh54
Posts: 242
Joined: Wed Apr 25, 2007 12:43 am
State: WA
Location: PERTH WESTERN AUSTRALIA
Contact:

Re: Small Block for EK Wagon

Post by kelleigh54 »

The one I have is probably too good to be cutting up the way I see it but it is up to you blokes .
I would rather work on a Morris 1100 than use a computer !!!!!!
kelleigh54
Posts: 242
Joined: Wed Apr 25, 2007 12:43 am
State: WA
Location: PERTH WESTERN AUSTRALIA
Contact:

Re: Small Block for EK Wagon

Post by kelleigh54 »

I hope what ever you are doing in Melbourne is good as you are missing out on Nostalgia Drags :OMGGG: and the way I see it is , there is only thing better and I don't get that any more . :esad: Guess that makes it the best day of the year for me :ebiggrin:
I would rather work on a Morris 1100 than use a computer !!!!!!
User avatar
WesternWagon
Posts: 945
Joined: Wed Jul 07, 2010 6:33 pm
State: WA
Location: Mandura WA

Re: Small Block for EK Wagon

Post by WesternWagon »

Rained out I heard, that's a real shame for the kranksters, so much effort goes into an event this size

Hope the weather gods smile on them for the next one
Member : Holden Car Club WA.
:ASRF Member
: Secretary FB/EK holden Club of WA.
User avatar
CHOPPED
Posts: 1193
Joined: Mon Feb 20, 2006 12:09 am
State: NOT ENTERED
Location: PERTH WA

Re: Small Block for EK Wagon

Post by CHOPPED »

not quite sure what you mean by not getting that any more leigh but im assuming your wife doesnt get on the forum to read your comments hey :lol: :lol:
il have a look for that black eye next time i see you
:lol:
HEY IT WASNT ME
Post Reply