Page 1 of 4

EK225-18965-S

Posted: Sun Jul 25, 2010 3:26 pm
by gpi
Image

BODY EK225-18965-S
TRIM 7411-1047
PAINT 585-9931
INSERT
TOP 585-0246

Early on saturday morning the weekend after black saturday, two mexicans stole away over the border with reckless intent.
The air was thick with smoke from the fires that raged on the not to distant southern hills, but our attention was focused on getting out of the border town. A quick fuel up later; the confined city roads opened up into vast rolling country side split in two by the blacktop single carriage way that meandered off into the distance. With only a dozen miles under our belt we entered the dreaded construction zone that would force us to slow the numbers rolling over on the odometer for over 150ks.
The sun had finally made its appearance and shone over my right shoulder as we consumed mile after mile. Fuel was taken in at Yass, both men and machinery appreciated the quick break ond fluids top up, but we had to push on.
By 12 noon we were passing goulburn and a phone call was made, "...yeah g'day mate, no problems" came the reply on the other end of the line as our imminent arrival was told.
The anticipation was at fever pitch as we made the colo vale exit off the hume hwy; we would reach our distination in only a minute or two.

"Wow. It looks heaps better than in the photo's" the turquoise paint was deep and wet looking. The owner was sat on his door step, one leg stretched out and the other bunched under his chin, admiring his car for possibly the last time. Pleasantries were again exchanged and we set about the car to reveal its potential. The hail damaged roof coupled a fairly average paint job, it looked like a white orange; some rust in the sills and a couple of other spots here and there around the back. Floors were good, it had new rubbers, tyres and a sweet interior albeit shod with marine carpet. There was a blue 202 mated to an aussie 4 speed and a hadfield chassis kit. The odometer revealed 10,000 miles since the resto and general roadworthiness was in excellent order. A quick consultation with my fellow mexican resulted in a PMI favourable way too many positives to pass up. The asking price was paid and papers signed.

I couldnt wipe the grin off my face driving along Remembrance Dr, Yerrinbool, and, as a pulled left on the steering wheel to get back on the Hume time, for a moment seemed to slow to a couple of frames a second. Out of the corner of my left eye i spotted a rosella flying at speed on a heading that would cross my path. "Its going to pull up" i thought to myself...

Re: EK225-18965-S

Posted: Sun Jul 25, 2010 6:35 pm
by gpi
Image
Image
Image
Image
Image

Re: EK225-18965-S

Posted: Sun Jul 25, 2010 7:12 pm
by Trev
I could smell the exhaust fumes with the telling of that story.
Car looks sweet, Trev 8) .

Re: EK225-18965-S

Posted: Mon Jul 26, 2010 5:52 pm
by my70wg
i wonder if its safe to post links to ebay here.......

nice car

aidan...

Re: EK225-18965-S

Posted: Mon Jul 26, 2010 8:22 pm
by mrs ratbox
my70wg wrote:i wonder if its safe to post links to ebay here.......

nice car

aidan...
:? :? why

what happened to the bird :?:

Re: EK225-18965-S

Posted: Sun Feb 13, 2011 5:57 pm
by gpi
SunnyTim wrote:nice, what's the go with the flash?
its a tilli products kit

Image

Re: EK225-18965-S

Posted: Fri Mar 06, 2020 4:15 pm
by gpi
Image

Re: EK225-18965-S

Posted: Fri Mar 06, 2020 4:22 pm
by rosco
So much to tell, GPI.... glad you have brought your thread back, looking forward to your posts.

The old girl certainly looks like you are making use of it... I have to ask, have we rekindled some passion?... I hope so.

Oh, by the way - might be time to add some fluid to the clutch master cyl res...

frats,
Rosco

Re: EK225-18965-S

Posted: Fri Mar 06, 2020 8:51 pm
by Errol62
Runs cool I bet. Nice story Patrick.

Sent from my SM-G973F using Tapatalk


Re: EK225-18965-S

Posted: Sat Mar 07, 2020 7:26 am
by FJWALLY
Nice one GPI - whats the plan with the old bus?

Re: EK225-18965-S

Posted: Sat Mar 07, 2020 8:41 pm
by Errol62
No doubt the EGR disabled. Decent cam? That’s all they need really.


FB ute fixer upper, EK van on rotisserie

Re: EK225-18965-S

Posted: Sun Mar 08, 2020 9:42 am
by rosco
C'mon Patrick,
the suspense is killing us.... story?

frats,
Rosco

Re: EK225-18965-S

Posted: Fri Apr 10, 2020 1:58 pm
by gpi
Plan is to get it on the road...
Think I should fix this before it gets worse. The edge is solid just started to rust from poor body work

Image

Image

Image

Re: EK225-18965-S

Posted: Fri Apr 10, 2020 3:20 pm
by Errol62
That is where it starts. Nekminnit bare metal respray 8{)


FB ute fixer upper, EK van on rotisserie

Re: EK225-18965-S

Posted: Fri Apr 10, 2020 6:02 pm
by gpi
how much do you charge?