Page 1 of 1

202 rocker cover

Posted: Wed Jul 14, 2010 6:24 pm
by nate_138
hey there chasing a 202 rocker in brisbane only have a 186 one at the moment need one to stop the rubbing! if anyone has one original or aftermarket would be great! cheers!

Re: 202 rocker cover

Posted: Thu Jul 15, 2010 2:26 am
by Trev
Thought they were all the same :? .

Re: 202 rocker cover

Posted: Thu Jul 15, 2010 6:27 am
by Blacky
Do you have roller rockers and they are fouling on the rocker cover ?
If so there are aftermarket rocker covers that are taller to allow room for them.
This is a classic example of the "if you modify one thing you must modify two more to make itwork " theory :shock: :?

Re: 202 rocker cover

Posted: Thu Jul 15, 2010 8:37 am
by nate_138
I also thougtthere wouldn't have been any difference but when you compare the 2 stock covers there's about 3-4 mm difference in the curve of the front and rear of the cover. So the rocker at either end is rubbing getting hot and cracking.

I have one here to compare the difference but it's not good enough to use.