fbekholden.com

Here you go...one EK/EJ "cut 'n' shut"
If you keep looking at it ..it sort of works an Australian answer to the 58 Chev,,, ..er...sort of...


Scotty.

hmm very 58 chevy!
Jimmy

I dont see ant 58 chevy there but I do see 59 buick

Cool Scotty. Has a hint of the Adonis, built by the Alexander Bros.

I found this picture of the black EJ coupe on the internet. It's got an FB/EK Roof on it by the looks of it. Anyone got any more pictures of it. Would be nice to see from a side view.


Then I had a few hours of quiet at work again on Friday so borrowed a pic of the 'purple people eater' and followed the theme of the Ek with the EJ tail lights. I used an EK front bumper. EJ tail lights and the rear panel go into position (close down on the bumper). The tail lights end up lower than the EK's would have been. So the rear fender piece that takes the position of the Indicator/reverse light needs to get extended downwards a bit to meet the tail lights. Now the rear fender got modified because the crease where the EK beading would normally run does not match up any more. So that has to get dropped down too and extended forwards to meet up with the pressing on the front fender. The EK beading's position is altered; starting at the standard position at the front and tapering downwards to meet up with the tail light as on an EJ.
What a mouthfull, makes sense to me. Anyone else follow all that??

The black EJ was possibly inspired by artwork that Aden Jacobi and i work on as part of a set og EJ based concepts in the late 90's. that were later shown in the Newsledder.
That picture sems to be the only one that has been posted anywhere of it. I was told by someone that had seen it, that it was flat black for a reason. As it was a work in progress.
Be nice to think that it has been or will be finished off, some day

Alastair, your version with the EJ tail lights looks sweet
After looking at it I have a couple of sugestions on some slight adjustments, could you shorten the bumper corners back a little where they seem to overlap the back edge of the Cruzin Skirts. And replace the stock EJ tail lights with a version of the Bubble lenses i made for Simon Telfords Mild Custom EJ

Be nice to see someone do this custom mod to an FB or EK

Looks trick , Its awesome when new concepts hit the pages of the forum , cool as

Alastair Saxton wrote:
Then I had a few hours of quiet at work again on Friday so borrowed a pic of the 'purple people eater' and followed the theme of the Ek with the EJ tail lights. I used an EK front bumper. EJ tail lights and the rear panel go into position (close down on the bumper). The tail lights end up lower than the EK's would have been. So the rear fender piece that takes the position of the Indicator/reverse light needs to get extended downwards a bit to meet the tail lights. Now the rear fender got modified because the crease where the EK beading would normally run does not match up any more. So that has to get dropped down too and extended forwards to meet up with the pressing on the front fender. The EK beading's position is altered; starting at the standard position at the front and tapering downwards to meet up with the tail light as on an EJ.
What a mouthfull, makes sense to me. Anyone else follow all that??

I LIKE IT!!!
Nice one Alastair!! Lot of thought gone into the bodys 'side crease' Wish I had a spare EK & EJ to fiddle with!
And as usual..noice photoshopping...

Scotty.

Devilrod wrote:Cool Scotty. Has a hint of the Adonis, built by the Alexander Bros.

Can't beat the A Brothers, DR ..those guys understand style

Scotty.

One of the worst tail light jobs I have seen was an FJ with EJ tail lights , it was shocking

Trev wrote:One of the worst tail light jobs I have seen was an FJ with EJ tail lights , it was shocking

Maybe so Trev...but at least someone had a go...and that's were true custom starts..I have the advantage of being able to draw what I have in mind before i do it in steel...some can't and therefore have to make it to visualize the idea...
I 'recon you could add EJ rear lights to an FJ with a bit of thought..maybe frenched in with a center light sweige line.

Scotty.

Gotta be better than the ever popular early valiant tail lights ....

Trev wrote:One of the worst tail light jobs I have seen was an FJ with EJ tail lights , it was shocking

There used to be a Sandman panel van with vertically mounted Sunbird tail lights years ago in Adelaide (where is that vomit emoction)

Harko wrote:Gotta be better than the ever popular early valiant tail lights ....

I wouldn't bet on that Harko .

Sputzwagon wrote:

Trev wrote:One of the worst tail light jobs I have seen was an FJ with EJ tail lights , it was shocking

Maybe so Trev...but at least someone had a go...and that's were true custom starts..I have the advantage of being able to draw what I have in mind before i do it in steel...some can't and therefore have to make it to visualize the idea...
I 'recon you could add EJ rear lights to an FJ with a bit of thought..maybe frenched in with a center light sweige line.

Scotty.

Maybe they were in the wrong place but all I can say is it just was wrong , Trev .

Sputzwagon wrote:

Alastair Saxton wrote:
Then I had a few hours of quiet at work again on Friday so borrowed a pic of the 'purple people eater' and followed the theme of the Ek with the EJ tail lights. I used an EK front bumper. EJ tail lights and the rear panel go into position (close down on the bumper). The tail lights end up lower than the EK's would have been. So the rear fender piece that takes the position of the Indicator/reverse light needs to get extended downwards a bit to meet the tail lights. Now the rear fender got modified because the crease where the EK beading would normally run does not match up any more. So that has to get dropped down too and extended forwards to meet up with the pressing on the front fender. The EK beading's position is altered; starting at the standard position at the front and tapering downwards to meet up with the tail light as on an EJ.
What a mouthfull, makes sense to me. Anyone else follow all that??

I LIKE IT!!!
Nice one Alastair!! Lot of thought gone into the bodys 'side crease' Wish I had a spare EK & EJ to fiddle with!
And as usual..noice photoshopping...

Scotty.

i don't come in here often this is the second time and looked at this and alastair has hit the nail right smack on the head with what i was talking about scotty, it could not possably be closer to what i was invisaging got the EJ rear have to go do a little more work on the guy with the EK body i've found, sucks but watched american graffiti last night and was set on a flat black 2 door EK gasser style