Page 64 of 77

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Wed Jul 04, 2012 5:05 pm
by Aussie Bob
Thanks Rusty, Egyptian Tan with Snowcrest white. Thanks for the chassis number as well.

Does the EK have the original engine or do you know the number?

Thanks so much,

Steve

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Wed Jul 04, 2012 7:47 pm
by Rusty EK
Steve it came with an engine seperate from the car , so not sure if it is the original , I would say not , as it is a auto body and has a manual box in it , but can check the numbers for you ?

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Fri Jul 06, 2012 12:59 pm
by Craig Allardyce
Hi Steve,

can you add the following plate details to your list. I couldn't find my FB on the list. I've done some searching and have now found the original engine number and another previous owner too :thumbsup: So far its a Melbourne built car thats been registered in NSW, Qld, and Vic! I wonder where else??
FB225 13046M
633-815
585-9562
585-9889
585-9562
FB29698M
Eng N0 B96098
Grecian White/Apache Red
Mephisto & Chianti Red/Horizontal Fleck (Plain red bolsters)

On the flip side do you or Matt have any previous owner history on the EK ute I bought last year?? All I have managed to trace is a photo showing it registered on NSW Historic plates some time back. Its still listed as being owned by Matt.
d9e6d78f-7c35-4327-ad26-61cfef67581e-lg.jpg
Thanks

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Sun Jul 15, 2012 4:26 pm
by John
my new one steve.

Subframe EK30157S
Image

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Thu Aug 30, 2012 4:11 pm
by holdenutechick
:esurprised: Tim I recognise those numbers I believe your nitro black used to belong to my grandfathers brother.

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Thu Aug 30, 2012 9:13 pm
by gnomester
My 62 EK hydramatic....

Image

and photo with some trim colours, turret is not origional paint and I do not know if body is Montana grey... but it is grey :wink:

Image

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Fri Aug 31, 2012 7:56 am
by Rusty EK
End of the road for this one , but here are the numbers

Chassis FB 27000S
Image

Image


Didnt notice this one when I was taking the pic , but it appears not to be stamped with the letter prefix of where it was made ??????

It has gone to a mates , so will have to have another look at it .
Image

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Fri Aug 31, 2012 4:16 pm
by muza
[quote="Rusty EK"]



Image


quote]
Looks like you coulda scrounged a few bits of that one!!!

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Sun Sep 02, 2012 1:47 pm
by ekwags62
muza wrote:
Rusty EK wrote:


Image


quote]
Looks like you coulda scrounged a few bits of that one!!!
Yep my thoughts too. Thought subframes would getting hard to find. Over here in Perth anyway

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Sat Sep 08, 2012 8:18 pm
by RobinGi
couldn't resist "buy it now"
Image
body ident
Image
Engine
Image
Chassis
Image

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Sat Sep 08, 2012 10:08 pm
by muza
RobinGi wrote:couldn't resist "buy it now"
Image
body ident
Image
Engine
Image
Chassis
Image
any more pics? doesn't look too bad from here :lol: :lol:

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Sun Sep 09, 2012 9:45 am
by RobinGi
Besides the rust holes in the cabin floor and passenger sill she'e in pretty good shape
i aquired it from a bloke in launching place who towed it from shepparton where its been sitting for 20 years, thats the only history i could get.
any idea what top = 333 ? couldn't find any reference to it in the register

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Sun Sep 09, 2012 10:28 am
by muza
It looks like they forgot to stamp the first 3 numbers?? :lol: :lol:

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Sun Sep 09, 2012 11:15 am
by RobinGi
Thanks for that, i does look like someone was testing the No. 3 stamp to see if it works (or half of "666" spawn of satan)
but if anyone know what the 333 reference is i would apprecieate.

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Fri Sep 28, 2012 6:09 pm
by WayneXG95
Time for an update Steve... :thumbsup: