Posted: Sun May 10, 2009 6:27 pm
i didnt kno axeman lived in darwin... 
aidan...
aidan...
that control panel looks hot man!
so is the flash a possibility?
cheers
NoMAD
fbekholden.com
FB-EK Holden Car Clubs of Australia
https://www.fbekholden.com/forum/
V8EK4us- 383 SBC,4 link,Torana f/e - 12 months on...
Page 50 of 76
Posted: Sun May 10, 2009 6:45 pm
nice job scotty, i mean axeman.. i mean...
that control panel looks hot man!
so is the flash a possibility?
cheers
NoMAD
that control panel looks hot man!
so is the flash a possibility?
cheers
NoMAD
Posted: Sun May 10, 2009 7:56 pm
AXEMAN is everywhere injustice (or justice ) is going on. 
Posted: Sun May 10, 2009 8:35 pm
AWESOME stuff ScottySputzwagon wrote:
Told 'ya the Axeman likes it!!
Scotty.
, thanks mate!Posted: Sun May 10, 2009 10:09 pm
very very
Posted: Mon May 11, 2009 7:56 pm
Cheers Guys!!
busy, busy, busy................One flash kit fitted!!!!!!!!!!!!! Very happy with the addition of the flash kit...........VERY NERVOUS drilling the holes!!!! Holes were sealed prior to fitting the kit. Took a fair bit to straighten the trims out but worth the effort I think. The holes were not drilled to start with because we were unsure about fitting the Flashline until we saw it painted
. I masked the area with masking tape then mrked the holes and drilled through the tape, this eliminates the drill slipping and damage to the surrounding paint from swarf.
busy, busy, busy................One flash kit fitted!!!!!!!!!!!!! Very happy with the addition of the flash kit...........VERY NERVOUS drilling the holes!!!! Holes were sealed prior to fitting the kit. Took a fair bit to straighten the trims out but worth the effort I think. The holes were not drilled to start with because we were unsure about fitting the Flashline until we saw it painted
. I masked the area with masking tape then mrked the holes and drilled through the tape, this eliminates the drill slipping and damage to the surrounding paint from swarf. Posted: Mon May 11, 2009 8:03 pm
I couldn't even start to think of drilling holes in that paint job , nice job , Trev .
, nice job , Trev .Posted: Mon May 11, 2009 8:18 pm
nice work Garry very stylish mate
Posted: Mon May 11, 2009 8:29 pm
nice man, must have been hell to drill number 1 hole...
not tempted to paint the red in there as per Axeman?
Cheers
NoMAD
not tempted to paint the red in there as per Axeman?
Cheers
NoMAD
flash kit
Posted: Mon May 11, 2009 8:29 pm
Looks sweet Gaz,really breaks up the black nicely,is that off your parts car?,also mate just wondering what springs you went with in your front end to get it at that height?,i realise its prob written some where on here but you are up to page 50 now 
awesome job,please drive it home up the east coast so us banana benders can have a squiz .cheerz
Edo
awesome job,please drive it home up the east coast so us banana benders can have a squiz .cheerz Edo
Posted: Mon May 11, 2009 9:39 pm
Lookin good
Posted: Mon May 11, 2009 9:54 pm
Looks great Garry. Spent the last few nites readin through your build. Best read Ive had in a long time
Cheers Robbo
Posted: Mon May 11, 2009 10:01 pm
That's FAN-FU#@!*ING-TASTIC!!!!!, Gary!!
Scotty.
Scotty.
Posted: Tue May 12, 2009 1:22 am
sorry i liked it better before you added the flash kit, it looked way cleaner. looks too much like a bloody fraud custodline i mean customline. 
Posted: Tue May 12, 2009 1:27 am
apart from that, bloody nice car