Page 31 of 44
Re: Rusty EK,s Ute
Posted: Fri Oct 21, 2011 8:28 am
by Rusty EK
Here you go Fatboy , bit hard to get up under dash and get a decent pic sorry .
The bracket that the gemini booster bolts to fits neatly inside the ek pedal box , so all I did was to cut it off and weld the bracket on the inside so that the brake rod was the right length to join up to the pedal that I used , this in turn made the pedal box assembly about 6mm longer than original .
So I cut off the end that bolts to the dash 6mm and welded up the holes and redrilled to suit , then I just modified the brake pedal to sit in the desired location .
Hope that makes sense?

Re: Rusty EK,s Ute
Posted: Fri Oct 21, 2011 2:04 pm
by Rusty EK
Made it back out of the shed today , working brakes and handbrake

,thanks to Trev for the last slide pin brakes work great , looks like am going to have to do a flare job on it

, didnt want too
Have finished off the tub , and blocked back most of the car again and spot puttied a few more spots , plan for the weekend is to finish blocking all the curvy bits , and do a flare job now , and put the last coat of primer on it .
Hopefully another week or so and we will look at throwing some colour on it ,wont be perfect , but will be tidy

Re: Rusty EK,s Ute
Posted: Fri Oct 21, 2011 4:24 pm
by Mick
what about getting the rims made smaller as in not as wide, if they are 7's now get them put in a 6" rim and even change the offset a bit if you have the room to spare inwards
Re: Rusty EK,s Ute
Posted: Sat Oct 22, 2011 11:20 am
by Rusty EK
No money left this week for wheel changes Mick , just paid my engineer and for all my new rubbers

, think they call it broke

, will have to be a hammer and dolly massage , much cheaper

Re: Rusty EK,s Ute
Posted: Sat Oct 22, 2011 3:59 pm
by Mick
Rusty EK wrote: think they call it broke
nup i call that normal

Re: Rusty EK,s Ute
Posted: Mon Oct 24, 2011 8:44 am
by Rusty EK
Re: Rusty EK,s Ute
Posted: Tue Oct 25, 2011 4:52 pm
by holdenutechick
Looking like some pretty nice work there Rusty keep up he good work

Re: Rusty EK,s Ute
Posted: Tue Oct 25, 2011 5:43 pm
by Trev
Thats a neat flare job

.
Re: Rusty EK,s Ute
Posted: Tue Oct 25, 2011 7:21 pm
by zl296
eeexxxxtra cab..
looks very 2011..

Re: Rusty EK,s Ute
Posted: Tue Oct 25, 2011 8:56 pm
by Rusty EK
Thanks guys
Borrowed a new carby off a mate tonight , WOW , what a differance , just could not get mine to run right , only trouble is now I thought the gearbox was slipping , nup its wheelspin , he, he

, she is a lively little thing

Re: Rusty EK,s Ute
Posted: Tue Oct 25, 2011 9:08 pm
by Mick Jagger
bigger tyres
Re: Rusty EK,s Ute
Posted: Thu Oct 27, 2011 7:32 pm
by fbtim
wheel spin with steering and brakes! good one.
Re: Rusty EK,s Ute
Posted: Thu Oct 27, 2011 8:59 pm
by Rusty EK
And no tree stumps , got to be happy

, have put 20 litres of fuel through it and havent been out the drive yet

Re: Rusty EK,s Ute
Posted: Thu Nov 03, 2011 6:32 pm
by Rusty EK
Re: Rusty EK,s Ute
Posted: Thu Nov 03, 2011 7:24 pm
by russo