fbekholden.com

Errol62 wrote:Graeme Tyler used an early Camry pair front mount. All metal, painted satin black. Not period but unobtrusive.

Interesting question, when thermo fans were first used.

Sent from my SM-A705YN using Tapatalk

Cheers - going to see if i can pick up a decent rad support and modify - if I can get 20 to 25mm I should keep 10-15mm clearance of fan and radiator


Sent from my iPhone using Tapatalk Pro

Look great but for the life of me cant get them to work now - i was super careful not to let anything in the snail - frustrating things


Sent from my iPhone using Tapatalk Pro

Now thats a pretty sound - all good now - would post a vid but no can do


Sent from my iPhone using Tapatalk Pro

Sent from my iPhone using Tapatalk Pro

I picked some up a few months back , finally got around to having a look at them and of course the low note works perfectly and the high note is a ball of rust inside .............

Blacky wrote:I picked some up a few months back , finally got around to having a look at them and of course the low note works perfectly and the high note is a ball of rust inside .............

Seams to be a common problem Blacky - Ive got another H note that doesnt work as well - diaphram very rusty


Sent from my iPhone using Tapatalk Pro

Looks good, FJW - but, I bet it sounds a lot better....
I have always wanted a HNH... never found one.... even if it's just "cosmetic" - it makes the right side of the hood lock plate look "balanced"... hated that hole there.. always looks like something is "missing"..

frats,
Rosco

FJWALLY wrote: Wed Feb 05, 2020 11:31 amLook great but for the life of me cant get them to work now - i was super careful not to let anything in the snail - frustrating things

During painting, you're supposed to fill them full of blasting grit, then sell them to someone else. The buyer then tries to fix the shiny black horn, earning a face-full of blasting grit.

Ask me how I know...

Cheers,
Harv

HAHAHAHA - that would make lots of bad words come out Harv - was my own stupidity thankfully - just had to clean the terminals better and they fired up perfect - thankfully did not have to disturb my painting.

Harv wrote: Wed Feb 05, 2020 1:24 pm

FJWALLY wrote: Wed Feb 05, 2020 11:31 amLook great but for the life of me cant get them to work now - i was super careful not to let anything in the snail - frustrating things

During painting, you're supposed to fill them full of blasting grit, then sell them to someone else. The buyer then tries to fix the shiny black horn, earning a face-full of blasting grit.

Ask me how I know...

Cheers,
Harv

Been a good day - Travis from sodablast just txt to say the front end gear all blasted/epoxied and painted - ready tomorrow for a couple of granny smiths - happy with that - hours of fun ahead to re-build


Sent from my iPhone using Tapatalk Pro

The old mattress on the left cleaned up well...

Lookin good rob


FB ute fixer upper, EK van on rotisserie

Yeah not sure what that was out of - these guys do great work (Ringwood Sodablast) - they did the ute body to epoxy and i couldn't be happier with that result - no loss of seam definition etc and squeaky clean metal.

he does some real exotics in there which are awesome to look at - very good.

Errol62 wrote: Wed Feb 05, 2020 3:06 pm The old mattress on the left cleaned up well...

Lookin good rob


FB ute fixer upper, EK van on rotisserie

FJWALLY wrote: Sat Feb 01, 2020 9:16 pm

Errol62 wrote:Graeme Tyler used an early Camry pair front mount. All metal, painted satin black. Not period but unobtrusive.

Interesting question, when thermo fans were first used.

Sent from my SM-A705YN using Tapatalk

Cheers - going to see if i can pick up a decent rad support and modify - if I can get 20 to 25mm I should keep 10-15mm clearance of fan and radiator


Sent from my iPhone using Tapatalk Pro

ive got a spare one you can have

gpi wrote:

FJWALLY wrote: Sat Feb 01, 2020 9:16 pm

Errol62 wrote:Graeme Tyler used an early Camry pair front mount. All metal, painted satin black. Not period but unobtrusive.

Interesting question, when thermo fans were first used.

Sent from my SM-A705YN using Tapatalk

Cheers - going to see if i can pick up a decent rad support and modify - if I can get 20 to 25mm I should keep 10-15mm clearance of fan and radiator


Sent from my iPhone using Tapatalk Pro

ive got a spare one you can have

Thanks mate but I picked a cheap one up from Warburton spares which is on its way - if I stuff it I may take you up on it though


Sent from my iPhone using Tapatalk Pro

do you get a manual column for the ezps conversion?