Posted: Mon Jul 27, 2009 6:24 pm
found the problem
condencer was stuffed.........
good to know.....
condencer was stuffed.........
good to know.....
new bling headlight
not a very good photo
Page 3 of 3
Posted: Thu Aug 06, 2009 10:21 pm
new bling headlight
not a very good photo
Re: keiths fb ute
Posted: Sun Sep 12, 2010 7:28 pm
been a while but started on the ute again
got a hr sdn from ken...
fitting the front end ..161 and 3 speed
also lh torana diff
14x8 on the back with 245x60x14 honooks....black rims with white walls....
want it ready for AAP....
got a hr sdn from ken...
fitting the front end ..161 and 3 speed
also lh torana diff
14x8 on the back with 245x60x14 honooks....black rims with white walls....
want it ready for AAP....
Re: keiths fb ute
Posted: Sun Sep 12, 2010 9:19 pm
U fitting the 161 outta the blue hr? Good
To see it go to use
To see it go to use
Re: keiths fb ute
Posted: Mon Sep 13, 2010 12:12 am
yes like you said it runs well
nice and ecinomical for a cruiser...
and the hr front end....
nice and ecinomical for a cruiser...
and the hr front end....
Re: keiths fb ute
Posted: Mon Sep 13, 2010 12:26 am
Yep it fired up pretty easy So it wasa good score for ya! Has all running gear n all!!!
Don't forget bout mine n steves bits
Ken
Don't forget bout mine n steves bits
Ken
Re: keiths fb ute
Posted: Mon Sep 13, 2010 2:26 am
i have a shortened 10 bolt in the shed had it for years...
its going in the fb next weekend....
its going in the fb next weekend....
Re: keiths fb ute
Posted: Wed Sep 15, 2010 1:27 pm
Hope you can put up some pics of the progress Keith.
Steve
Steve
Re: keiths fb ute
Posted: Wed Sep 15, 2010 6:25 pm
it was going to be stock
but changed my mind...
but changed my mind...
Re: keiths fb ute
Posted: Wed Sep 15, 2010 6:35 pm
I hear you. Hopefully you can take some pics of the upgrade as you go.
Steve
Steve
Re: keiths fb ute
Posted: Wed Sep 15, 2010 8:16 pm
sure will mate....
front end out of donor hr and motor
diff as well
front end out of donor hr and motor
diff as well
Re: keiths fb ute
Posted: Sat Sep 18, 2010 10:57 pm
You lucky bugger, Keith! 
I always wanted another 161 for my EK (in the future) they're a fantastic little motor and perfect for cruising.
All I have here is a chew-o-chew...
..more c.i's than I need!
Scotty.
I always wanted another 161 for my EK (in the future) they're a fantastic little motor and perfect for cruising.
All I have here is a chew-o-chew...
..more c.i's than I need!Scotty.
Re: keiths fb ute
Posted: Sat Sep 18, 2010 11:41 pm
i,ll swap you...
wanted to fit a 202 blue ...
but got the 161 cheep...
i had one years agoi n my ej they go well..
fitting extractors as well.and thermo fan..
should be a good cruiser and cheep to run...
wanted to fit a 202 blue ...
but got the 161 cheep...
i had one years agoi n my ej they go well..
fitting extractors as well.and thermo fan..
should be a good cruiser and cheep to run...
Re: keiths fb ute
Posted: Sun Sep 19, 2010 12:45 pm
Wish you where on this side of the continent..I'd do the swap in an instant!vintageholden wrote:i,ll swap you...
wanted to fit a 202 blue ...
but got the 161 cheep...
i had one years agoi n my ej they go well..
fitting extractors as well.and thermo fan..
should be a good cruiser and cheep to run...
I think the freight would be a killer from N.S.W to W.A and visa-versa!!
Scotty.