fbekholden.com

Posted: **Wed May 13, 2020 8:03 pm**

Great news.
Make one out of a spare corner mould

Posted: **Wed May 13, 2020 9:02 pm**

Aah right, so it clips over the ends, not into the rubber, i haven't had anything to do with em, thanks.

Posted: **Wed May 13, 2020 10:13 pm**

If you've got a spare corner mould you better make two so ad not to waste it.

Sent from my SM-G973F using Tapatalk

Posted: **Wed May 13, 2020 11:10 pm**

Alrighty, off to my local FB spares dealer!!

Posted: **Thu May 14, 2020 5:50 pm**

Mate it looks awesome!!

Good to see she's nearly back and glad you stayed with the same colour scheme.

Keep the photos coming.

Regretting letting that one go.

Good to see she's in good hands.

Posted: **Thu May 14, 2020 11:03 pm**

Thanks mate, couldn't find any reason for the paint cracking, at least now we know what's underneath.

Posted: **Fri May 15, 2020 8:17 am**

Posted: **Sun May 17, 2020 10:39 pm**

This article from Street Machine just came up on Facebook

https://www.whichcar.com.au/features/19 ... njected-v8

Posted: **Sun Dec 20, 2020 1:51 am**

Been a while but worth it i think. Been for a few test drives, over heating problems solved after fitting right size thermo fans, 2 1548CFM Maradynes, although A/C not charged as yet. Which brought me to my next problem, i fitted a 120A alternator, damn Gilmer drives too under driven, so found standard single V pulleys and had the alternator pulley machined from 62mm to 52mm now have ~3-1 ratio, idle charge good and solid.
The electrician did a great job of getting everything to fit neat and tidy and still have a bit of glovebox space.

: Update photos.jpg (43.5 KiB) Viewed 1613 times

: Update photos2.jpg (39.07 KiB) Viewed 1613 times

The under panel is hinged for easy access.

: Update photos1.jpg (48.6 KiB) Viewed 1613 times

: Update photos3.jpg (53.5 KiB) Viewed 1613 times

: Update photos5.jpg (49.76 KiB) Viewed 1613 times

: Update photos6.jpg (50.96 KiB) Viewed 1613 times

: Update photos7.jpg (53.92 KiB) Viewed 1613 times

Posted: **Sun Dec 20, 2020 2:02 am**

The A/C compressor will probably be covered by a fake subwoofer enclosure to complement the real sub enclosure on the opposite side of the boot.
The spare tyre was an VF space saver, way taller diameter than the road tyres plus too hard to get in and out so going no spare but going to try green goo in the new tyres and carry the mini compressor, as a bonus more boot space.

: Update photos9.jpg (59.64 KiB) Viewed 1612 times

: Update photos8.jpg (41.54 KiB) Viewed 1612 times

Posted: **Sun Dec 20, 2020 8:19 am**

Very nice work briby. Hope she runs well with cold air blowing.

FB ute fixer upper, EK van on rotisserie

Posted: **Thu Dec 31, 2020 2:53 pm**

Looking good mate.

Got any photos with the new wheels fitted?

Posted: **Thu Dec 31, 2020 4:59 pm**

Still working on tyre sizes, this is a trial second hand tyre, will have a red stripe when completed.

: FB wheels.JPG (31.67 KiB) Viewed 1529 times

Happy New Year

Posted: **Fri Jan 01, 2021 11:57 am**

Happy New Year

Posted: **Sat Jun 18, 2022 5:25 pm**

Great to see you and the car in the flesh o the weekend briby.
Cheers,
Clay

Sent from my SM-G781B using Tapatalk

fbekholden.com

Helenor, Show Car Sunday Driver to Daily driver

Re: Helenor, Show Car Sunday Driver to Daily driver

Re: Helenor, Show Car Sunday Driver to Daily driver

Re: Helenor, Show Car Sunday Driver to Daily driver

Re: Helenor, Show Car Sunday Driver to Daily driver

Re: Helenor, Show Car Sunday Driver to Daily driver

Re: Helenor, Show Car Sunday Driver to Daily driver

Re: Helenor, Show Car Sunday Driver to Daily driver

Re: Helenor, Show Car Sunday Driver to Daily driver

Re: Helenor, Show Car Sunday Driver to Daily driver

Re: Helenor, Show Car Sunday Driver to Daily driver

Re: Helenor, Show Car Sunday Driver to Daily driver

Re: Helenor, Show Car Sunday Driver to Daily driver

Re: Helenor, Show Car Sunday Driver to Daily driver

Re: Helenor, Show Car Sunday Driver to Daily driver

Re: Helenor, Show Car Sunday Driver to Daily driver