After ages of nagging today I finally made it out to Balcatta Bunnings so I could get some MDF for the boot of my car.
Before we left I ran some chalk where the fanbelt goes on the fan, and after a quick squirt up the street the annoying squealing sound had gone
thankyou
We went for a nice drive down the coast where we stopped at Hillary's Boat Harbour for fish n chip's, coincidentally parking just near this fe or fc (what are the differences?)
we were gettin plenty of looks
After lunch we decided to head out to Bunnings, highlight of the day were some girls at a cross walk checkin out my car (in bikini's) and you know I hit that klaxon horn
unfortunately no pictures
Also on the way we had an old Pontiac Firebird pull in behind me, cruised with him for a while.
When we got back in the late afternoon I got busy
this is what I started with
I removed the subwoofer from the box so I could trace a circle on the MDF I was using, making it nice and central by ruling a line through the halfway point and using a pencil to trace around the sub.
As I would not be able to get the backing in with one piece (too wide) I cut it in half and cleared part of it from the boot hinges, after matching it with the other side I eventually got the board to sit flat on the subwoofer box where I then screwed it to the box (covered by upholstery later in the week)
I then had to take everything apart to put the sides back in, although I did have to shape the backing boards to allow the sides to sit closer too the floor.
I am happy with the job I did, although it may have been a bit dodgy (suits my character
) and I would like the sides closer to the floor, it will all look perfect once I upholster it on Sunday
Here's a cool picture I took
) most things look like crap till they are covered up 
