Page 12 of 42
Posted: Tue Sep 15, 2009 1:38 am
by NoMAD
The old man got bored why i was at work and finished welding in the speaker buckets...
and we got the hand brake bolted up, so just a couple more pics...
started work on the cover hopefully shouldn't take to long!
Cheers
NoMAD
Posted: Tue Sep 15, 2009 12:33 pm
by Devilrod
NIce work NoMAD! Some nice work for sure.
Posted: Tue Sep 15, 2009 7:17 pm
by Craig
Comming along mate well done
Posted: Tue Sep 15, 2009 8:58 pm
by (AUST)Mod
Bling Bling!
Posted: Sat Sep 26, 2009 11:44 pm
by Mephious
Good to see some progress Nomad !!!
I like the location of where you put the gear indication , should be nice and easy to see above the ash tray !!!
Posted: Sun Sep 27, 2009 8:13 am
by Sputzwagon
Posted: Sun Sep 27, 2009 11:28 am
by NoMAD
i can't tell if you being sarcastic or not scotty...
there FB Headlight buckets!
the gearstick is 16 inches... and still probably my favourite part!
cheers
NoMAD
Posted: Sun Sep 27, 2009 11:37 am
by J
should have added some class to the fb and welded in EK headlight buckets
im extremely jealous of your gearstick and handbrake...
Posted: Sun Sep 27, 2009 9:10 pm
by NoMAD
Decide to build a cover the go over the top of the rad... give it a bit more of a smooth look, still a work in progress however
and bolted up the XB Master...
and had some spacers turned up on the lathe to put the booster a little of the firewall...
Cheers
NoMAD
Posted: Sun Sep 27, 2009 10:00 pm
by (AUST)Mod
SM feature car in the making
Posted: Sun Sep 27, 2009 10:09 pm
by NoMAD
ha... good one...
but this is going to be driven
cheers
NoMAD
Posted: Sun Sep 27, 2009 11:56 pm
by Sputzwagon
Nice master cylinder & booster, Nomad..(what's the booster off? XB as well??) ,if so that's sorta what I'm after for mine!
Sorry for the earlier post it was'nt a sarcastic comment, I just thought it looked familiar but could'nt recall where I saw that headlight bucket before...must be gettin' old
.
Scotty.
Posted: Mon Sep 28, 2009 12:15 am
by NoMAD
the boosters a 7" double can be bought from most parts stores / brake stores what they usually use uner the floors of hot rods...however they usuallly price between 200 & 300 depending on finish...
it was more so a page back i was dicussing the headlight buckets... not to worry mate
cheers
NoMAD
Posted: Mon Sep 28, 2009 12:41 am
by Brodie
Lookin' pretty sweet dude.
Will have to pop round soon and have a geez..
Brodie.
Posted: Mon Sep 28, 2009 3:52 am
by Trev
Sputzwagon wrote:Nice master cylinder & booster, Nomad..(what's the booster off? XB as well??) ,if so that's sorta what I'm after for mine!
Sorry for the earlier post it was'nt a sarcastic comment, I just thought it looked familiar but could'nt recall where I saw that headlight bucket before...must be gettin' old
.
Scotty.
Hi scotty, check this out on ebay, the seller is a top bloke
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 500wt_1182